This was a very beat up and plain model when I bought it , but has cleaned up well . Original Power was from a Torpedo 850 and heavy 12v 7Ah lead acid battery giving run times of around 20 minutes of plod along performance . Now however Boat is powered by Thumper motor and 4 cell Lipo's giving over an hour of entertainment . Cut's a fairly mean wake too . Needham lake in Suffolk is it's home surf 👍

My Mersey Ferry Snowdrop on Venetian night. Taken this October at New Brighton Lake on the Wirral.
She has 72 L.E.D.'s Illuminating the interiors and decks.

Astra was built from an original 1927 Camper and Nicholson design model, acquired from C&N by my wife's great grandfather. Passed on through the generations, she came to me in a poor state in 2013 and I have rebuilt the deck to 1931 superstructure.
Despite being an antique, she sails every week on Needham Lake.

My latest project - Hull and some bits from a static display model, based on several photo's of Greek fishing boats, Mtroniks 400 motor, & 15A ESC, 12v SLA battery & 30mm 3 blade prop. Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. )
She sails fairly well on first trial this week at Weymouth & Portland MBC, Miles Cross Farm lake . Hope to post video soon.
Chris

This is the fifth of the six sisters of the isle of Man Steam Packet Company, entered service in 1952 and scrapped in 1980. it is built on a Metcalf Models hull, and the superstructure is scratch-built from styrene. Fittings are a mix of scratch and purchased. it is powered by 2 Electronize motors with 2 ESC's by EA Electronics, has a smoke unit from Harbor Models controlled by a Viper ESC, a sound system from Model Sounds inc of Ontario, and powered by NiMH batteries. it is also fitted with a working bow rudder and lights, all controlled from a Robbe F14 Navy radio fitted with 2 twin sticks. Preferred sailing location is Lake Lisgar in Tillsonburg, Ontario.

this one is the sister ship to the Anglian man of mobile marines.Used as an estuary dredger to disturb the silt by a plate along the bottom of the channel off the a frame at the back. I was dead lucky to win best on stand for hoylake model boat club at Haydock Park 2013.

My dad's 2 and my 2 at Sycamous, British Columbia, Canada.

here are some additional photos this boat is split in two to make easier to carry to the lake, right now she's about 60 lbs

nearly finished will give it a try on the lake when the weather allows

This boat is scratch built on a Fiberglass Hull. The Lily was one of two ferries built in 1900. Her sister ship was the Rose.
The superstructure of the model is largely light-ply and paneled to resemble the orginal. She had an open top deck and as you can see the navigation pods were open to the weather.
A semaphore signal arm was included as radio was not yet used to communicate with each other on the Mersey.
The model is approx1/48 scale and built from a couple of photos and sketches that exist. She is powered by two 340 electric motors and controlled with 2.4ghz radio. A 12 volt battery gives the power. Both decks are individually planked.
She has sailed at Hoylake.

Another damaged fiberglass hull rescued. every thing else made by me. At 3/4"=1' a very big model. Completed 2012 but only sailed twice, a very good sailor just needs a big lake. The mast lifts & folds forward after removing the hatch. The top mast lowered, the bowsprit retracted and the sails raped around the shrouds, held in place with masking tape. ( this stops the lines from tangling.) Takes about 5 minutes to reassemble.

I have bought it from Robbe in Germany. it is 7 years old and it is working very well. There are two brushed motor and navy ESC from Robbe. I use it to drive some lake and pool in my city.