6ft loa, RC, scratch-built, grp hull. 10 yrs old.
Sold to private museum.
Am building my 3rd RC model of HMNZS Taranaki, Rothsey class frigate. Over past 40 years have built many RN - e.g.
Force H, Med., 1943, such as Illustrious, Sheffield etc.
Refer www.modelboats.co.uk January 2014 issue.

My main request is that I can establish somebody UK with
similar interest, despite my living NZ but unable to attend
your excdellent sights.

Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.

Jeroen

A few pics of my partly scratch build RTTL from Kitshack. Picked this up from Ebay as a first kit.
Has a few printed balsa hullparts but lots of templates to cut out. Plans also show lots of topside details.
Powered orignally by 2 MFA 500's and 2 7.2 NiMH with 35mm props, OK but run time poor.
Complete change, 2 400's and downsized to 25mm props, much better run time and good on the plane.
Next upgrade is to LiPo batteries.

Next build is likely to be an Aerokits Sea Hornet or Sea Breeze.

I decided to build from scratch HMS Blake, I used the Jecobin Plan for HMS Tiger 1/96 scale. This was the first ship I served on in the Royal Navy 1976 to 1979. The hull is supplied by Scalewarships.com, the fittings, Scalewarships.com, John Haynes Fittings and SIMAR; the running gear from GT Sitek.

The build is nearing completion and now requires the guardrails and the decks fixing in place.

It is an rc model that consent the customizing of the cockpit cabin but it comes in cheap colours (red, yellow and gray) so I decide to go to a real nautic shipyard to paint with nautical lacquer in a real creamish White! added some decal for water line and lights and scratch build anchor

build from a president kit with battlecraft armouments twin 1400kv motors & 90amp watercooled esc 11.1 5000mah lipos

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

1mtr yacht built from deck level from a fibreglass hull I was given by a friend it has the number two rig on I am in the process of building the number two rig just waiting for a decent day to try it out

Completely scratch built using balsa wood and Mahogany strips for the decks and bridge and the free plan by James Pottinger issued in Model Boat Magazine November 1996. The plans were well drawn at a scale of 1:93 how ever I doubled the size by just transfering each measurement directly onto the wood and a few card patterns were made when panneling the hull.
Powered with twin 12 volt motors, two 12 volt lead acid batteries and two 1 3/4" props I am well sattisfied with the end result. A full build log with pictures can be found on the ''Leith built Ships" web site, or look under ''The Loftsman"

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

scratchbuilt from ply and balsa wood powered by two Caldercraft 750 motors to 40mm props only took about three months to build as a winter project its not perfect but was never meant to be more than a toy, 54 inches long and gives a good response in speed and handling

Got my 3rd build finished its a Northumbrian Coble, looking forward to put it on the lake at QE2 park Ashington