This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

In the process of converting a revell 1/400 version of the Queen Mary2 into a working r/c model using pager motors in the pods instead of using propshafts to keep it as authentic as possible. Have put gearing in to turn pods so dont have to have a rudder. So far all tests have been successful and will shortly have all detailing done and have ballast sorted ready for test runs.

HI " I thought I would put my biggest model from my collection for all to look at ! HMS Avenger took approx 3 years to build . " She is a type 21 frigate at 1/64 scale . At 6 feet long . Scratch built on a fibreglass hull from plywood plastic card & metal parts . Works on a six channel futaba skysport .
Full working red & white leds on deck and cabin , lynxs helicopter with working rotor blades with landing lights. Working radars, bofor gun , A ships whooping sound . Runs on two speed 700 motors off a 12volt gel sell battery which give a good 1hr sailling time . Controlled by a 50 amp speed controller with two brass propshafts behind good size rudders which give a excellant turn .
My model HMS Avenger is a copy from the real ship in which took part in the Falklands war in 1982. Painted in the same grey with a green deck . She looks great on display or on the water . Avenger gets a lot of interest from the general public . please enjoy looking at the photos shown at Sheringham & Eaton park Norwich Norfolk .
" thank you .. A Prestney

bought this 50inch hull off ebay and thought I would try a make a boat just with my own idears and this is how it turned out,powered by a 720bb motor,12inch propshaft and a 60mm 3 blade brass propellor.all built from odd bits of wood in my shed. installed wood in bottom and then filled with a two part epoxy resin

I took advantage of some nice weather to take my Wavemaster out for a spin this afternoon. She's around 58 years old, I bought her from the son of the original builder and have tried to keep it as original as possible so converted from IC to electric, repainted the lower hull, new stainless inner propshaft, made some handrails and fitted the lights. it was very dirty but has cleaned up a treat. I'm running a Darke Horse 700 with a 7.2v 4300Ah battery for these pictures but have the facility to use either one or two sticks, run time today over 30min with some to spare so I'm well pleased! it's a gorgeous classic boat.

This is my Sea Hornet which was rescued from Ebay see photo 1. Gray (Froggyt996) recognised it as a Sea Hornet even with the hideous cabin attched which the prvious owner had made. Also see the propshaft angle in photo 1 - would this have ever worked? Gray again restored this for me, I wanted a mahogany boat which looked like an italian speedboat and this is what he did for me see photo 2. Photo 3 sees the Sea Hornet on the sea at Southsea just after the start of the Round Britain Race in 2008. The receiver battery failed and a very nice Lifeboat Man from Southsea happened to be watching me run the boat and rescued it when it stopped running. it was put in dry dock over this winter to be tidied up again after a couple of years constant use and photo 4 sees it with its 2 new screens, re-varnished and 2 new rubbing strake. it is powered by 2 Graupner Speed 600 motors, a Ripmax sea sprint watercooled speed controller and 2 x 3 blade prop shop props on 2 x light weight shafts. it is also filled with bouyancy foam it case the inevitable happens which makes it quite heavy. it is ran on 2 x 8.4 volts nicad sticks and gives me a running time of approx. 20 minutes with quite a good turn of speed.
Marie (alias Mrs Froggyt996)