First and foremost I would like to thank everyone that answered my question about fiberglassing. Your help guided me through the process and I believe that it came out very good, but still needs more work to smooth out the resin and of course I will post more progress pictures later on.
The name of the tug is “STATIA RELAINT”.
This is one of a fleet of four vessels built by Samakona Yards in Spain.
I chose this one because of the stealth lines that has throughout the structure or just because I love how it looks.
I am an artist (painter), and we fall in love with colors and shapes, so maybe thats another reason why Im building this particular one.
I was lucky to find the plans and enlarge them to 33” approximately 1/32 scale.
This will be my FIRST scratch built even dough I have built others from kits, but never like the experts I see in this forum.
I will be open for questions, suggestions and criticism.
Thank You
Julian
From Sunny Miami.
😎

Pathfinder Scratchbuilt from Vic smeed Plans, working lights , on 2 circuits, engine sound units, radars,

While waiting for a second coat of epoxy to dry on my other model i enlarged some plans of an old Sea Hornet kit that I purchased a few days ago. I copied them 25% larger which gives length of 32 inches i then cut out the keel and bulkheads, i have only fitted them loosely for the picture.
Done a bit more to the hull and fitted the stringers and the bottom skins

I like Douglas Adams books. ..(and Terry Pratchett too)
But I was most attracted to Gusty Cat ...
So.. Model of thames barge , build according to modified plans of sb Lady Daphne in scale 1:28 (length cca 1 meter ).
it will be again a model with an auxiliary motor, staysail class.
I am currently grinding the laminate hull with several layers of putty.
It is an ungrateful job.

This is me harbour tug I've bin building for the past 9 months and is now ready for a ballast and trial on the water I have made nearly all of this by hand with no plans the only thing I payed for are some of the fittings

A Canadian Coast Guard Icebreaker
Built 1967 @ Canadian Vickers Montreal
Currently owned by the Chilean Navy
The model was scratch built from the plans supplied by Marine Modelling int.
The model is to 1:120 scale and is 750mm long
The model is based on the original build of the vessel.

I bought a used hull of the Ayton Cross and look all over the internet for some plans but found none.
I did find a lot of images though.

I bought most if not all of the fittings and since have decided that the way to go is to make what you can from what I can get hold of.

So all other model boats are and will be scratch made.
I have two on the burner at the moment.

Anyway some of the Ayton Cross looks right some of it does not.

But I can always do it again as I hopefully get a little better.
This one again is awaiting Ballast and it will be ready to go.
I fitted two Engel 12 volt motors and made the mounts in grp then Laminated them into position..

Everything has been hand painted and slightly aged .

The bow thruster was made using some household plumbing pipe a small propshaft Again home made and it works very well.

Something to play with as I build hopefully better.

Morecambe Bay Prawner (Nobby)
Scratch built from plans in a woodworking mag 30+ years ago.

Just completed Thames Barge (Isla May)

This is Creepy,a springer tug that is 5 yrs old now.He pushes #1200lb pumpkins for the pumpkin regatta along with saving many of the PMPBA club members boats from certain sinking or floating away.I never go to any of the club floats without him.He runs a Harbor freight 550 motor running a Target Hobby 320amp ESC,on a 5000mah 2s lipo battery.The plans can be downloaded free off the internet and takes about a week to build for the experienced builder,Great for the new boat builders to do because its an easy build tug.Simple door skins,some balsa,1/2a running gear from Dumas,1.5 brass prop,2x2 rudder from aluminum,cheap 2channel radio,ESC from Target Hobby.

Hi,
this is my last model, thames siling barge on its maiden voyage,October 2, 2016. Preparation for construction of barges - Fall 2013. I have not chosen according to what plans I will build. I bought plans for TSB Lady Daphne, finally I chose but I have other plans.
On the internet I found an information plan barge "Champion class" from H.I.Chapelle. Even though I had prepared and cut out the ribs on the LD (1:28, Loa 98 cm), I finally began to build a "Champion". Loa 110 cm.
More photos and a description to> http://barge.homeunix.org/index.php/home <
It still remains to be done many details - winches, dinghy, and more. Also, set the the sails just sewn just for a test.Everything I wanted to finish through the winter
Tom

Lorraine is an ongoing build, started this year ( 2016 ).
Building from plans MM 512 ( MBPS ).
Hoping to be a twin screw powered hull.
And sail on the local pond at County Hall in Worcester.
Keel and Bulkheads are in 5mm Ply, and plank on frame in Obechie 6mm x 3mm..

Scratch built 2016 no plans built from ships drawings and paintings.Twin props Maiden at Llandrindod Wells lake 20/8/2016.Ps nearly lost it bilge pump accidentally switched on drained battery thankfully got it back just. 😯 😰