BRAVO ZULU! That is a fine boat with every attention to detail. I especially love the fact that you have the proper dayshapes hoisted.
I am a USCG Veteran, QM3(SM)
Your model boat looks wonderful and would be a great example to show people how this model should look like. Would it please be possible to have some of your build photos emailed to us so that we can show of your great work on our new website.
this is a slightly modified RTR tug Southampton the main casing has been lowered and a bigger battery fitted, but she still has the original motors and props, she is seen her towing a large barge a flat top pontoon ,a small tug and a Graupner German patrol boat, with a model slipways Envoy doing its best to overturn the lot.
🙄 Must be me beeing fick but can you explain what you have done to lower the ? "casing" pics would be good. What battery have you fitted as I have mine in bits at present ready to install a proper esc "Viper Marine 15". I was going to go the route of 8 AA NiMI 3000mah in original compartment so interested in what you have done as it looks great in the video. 👍
these tugs are all 1/32nd scale the tug doing the main towing is a modified Cruiser kit, and the tug dragging on aft is a scratch built tug called the SIMLA she was originally built for wm watkins london and worked the Thames for nearly 80 years.
the model is electric powered with a 12 volt system, the tanker is 16ft long and has her own power as well (just in case). 😯
HI we sail at The Blue water shopplng centre,near Greenhithe in kent the tanker is in 7 sections and each section is held to the next with two steel pins.we don't tend to take it anywhere owing to the transport problem. Geo
The tugs are towing the chantry club 16ft towboat, the two tugs are 1/32nd scale scratch built with 12 volt motors, they are The Vanquisher and The Dhulia, both River Thames tugs and in real life could be seen working together at Thames Haven oil terminals towing Tankers.
this is the Vanquisher, she was the first Diesel powered ship towing tug built for the thames in 1955.
the model is scratch built plank on frame, with 12volt motor, lights,and revolving radar.
HI Dave yes she is a rough representation of am old T2 type tanker. made of plywood in 7 sections each section is held to the next with two vertical pins through slots and brackets, she has her own power as well, she was made for towing around the lake we use at Bluewater shopping centre,I will put some pictures of her construction in the build blog pages for you, all the best george.
J. R. MORE - LAST OF THE LARGEST STEAM TUGS BUILT ON THE CLYDE. The best looking tugs ever built!
This model is scratch build at 1:48 scale of the SAR&H Durban tug J. R. More, which was the last large steam tug built on the Clyde in 1962.
It took over 2 years to complete this model, which was my first scratch build from the modified plans of a sister tug called the F.C Sturrock, which was also stationed at Durban as the shift tug for that harbour. Other tugs of the class were also stationed at Port Elizabeth and Cape Town.
The J. R. More was the newer day tug in Durban, most often used to service the Union Castle ships and others in, out of Durban and remembered by so many visitors to South Africa of that time.
This model tug on the water has differential motor control, software linked with the rudder, can go about on the spot and a delight to sail as a model, capable of 6 or more hours on the water. Working Rotating Radar, lights and woop-woop sounder as per the original tug. I would also like to install the Telegraph bells, however these would drive fellow modellers to distraction, as they were a very distinctive sound and very regular, Implanted and well remembered by the crews and those in and around the harbour, even today. The engines on the other hand were almost quiet and by all accounts very reliable.
This model is ballasted mainly by two 7 Ah 12 Volt SLA Batteries for the main drive motors and a 2 Ah 12 Volt SLA (Aft ballast) for the Lights, Radar and Sound unit. All up weight is 14Kgs and capable of above scale speed from the two MFA 6:1 ratio Geared Motors driving two 4 bladed 70mm screws.
This model has onboard charge regulator circuit, built-in minature dual volt meter to allow quick on-board voltage inspection and single plug-in charge and regulator socket for charging all 3 Batteries together.
The actual full size J. R. More tug still survives and can be visited at the Durban Maritime Museum in Durban, South Africa. Local supporters are undergoing essential repairs, restoration and preservation with private and company financial support.
J R More is the only surviving large steam tug left of this class and as Important to the skills of the Scottish shipbuilders of the Clyde.
This Is a scratch built paddle steamer named "Jeanie Deans "
This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her
Owing it's origin to the RNLI lifeboats of the 19th century, the US Coast Guard 36'MLB saw service from 1900 to 1987. The USCG built over 300 boats of this class in various "mods" spanning it's life history. Constructed of wood and fitted with a bronze keel it was powered by a 4 cylinder engine later modified with a diesel motor. Early powered 36' boats carried oars and sails as auxillary power. My 36500 model was based on the famous Chatham Lifeboat Station in Massachusetts, USA. On Febuary 18, 1952 the CG 36500 rescued the 32 survivors of the tanker PENDLETON during a night time nor'easter storm. Without radio or radar the Coast Guardsmen found the stricken T-2 tanker in the blizzard, taking the crew off one at a time. With each pass of the lifeboat a tanker crewman climbed down a rope ladder and "fell" into the lifeboat. With all on board, the 36500 found it's way back to Chatham harbor much to the delight of the towns people and the Coast Guard! The most amazing fact regarding this rescue was that the 36 footers were only designed to carry 19 people, including the 3 man CG crew, without capsizing.
The model was scratchbuilt of balsa strips and aircraft plywood, using official USCG blueprints. Powered by a 6 volt motor and a 2 channel radio, the Chatham lifeboat is pleasure to run in my local pond.
Thanks Mike, I must try balsa. Just now I'm using 3mm pine planks which take some clamping while the glue dries. Like you, I resin wash the finished hulls inside and out.Regards, Ian.
This is an Arowana 22.2" mono EP hull, allegedly self righting, however, on it's maiden run I turned it too fast and flipped it, sadly the self righting didn't, and a hatch clip failed, the end result was that after about 40 seconds of being upside down, the back end dissapeared, and it ended up 70% submerged with about 6" of bow pointing towards the sky. I have since had a play in the bath, and cannot get it to self right, also it leaks water from the factory fitted divider for the flood chamber, so not the quality that I thought it was, don't quite know how to rectify that one.
