Based on the US Coast Guard 36' motor lifeboat, the Canadian Coast Guard operated a number of these boats modified for cold weather operation. The model is a fiberglass hull, the reat is scratchbuilt using baltic birch wood, brass, and plastic. The model measures 28" based on the scale 3/4 inch equals a foot. it's powered by a 6 volt Dumas motor and operated with a 2 channel radio. A fun build!

Finally managed to get a fellow club member to take some video for me.
This is a hobby King Tunnel hull boat, running a brushless motor and 11.1v 3 cell.
The weather was a bit windy, hence the rough sound, the water too was slightly choppy, any worse and I would of not run the boat, too risky flipping the hull over !

The boat itself was yet another ebay "rescue" item, sold by "cash converters", all I say it was a great pity the previous owner could not afford to keep it, its a fantastic piece of kit, and so, so much fun to handle. he also did a superb job of applying a different set of decals and repainting it, so thmbs up to this guy, hope that some day he finds this site and the video clip.
Your boat is still being appreciated and being run "as it should be - full throttle"

this is my lovely boat jessica, shes fairey huntsman 31, she was built in 1994 by david john tittensor I think it was a scratch built boat, I'm planning to repaint the boat but cant make up my mind what colour weather to go with the blue or the lovely deep burgundy that I have seen on the faiery huntsman owners page Ive saled her twice now and looks lovey just cruising around on the water

here are few pictures of sea queen scratch built plank on frame using Ikea blind slats ,
first
runs OK but still to sought out motor esc and prop , runs of 5mins befor cut out kicks in . ....
so back in the dock for motor change , so when weather gets better will give it another go at Portishead where there is bit more space to get some on the water shooting-pictures 👍 .cheers Larry...

Bill finally launched his boat. 😀 The weather was kind for some of the time so I was able to take some pictures and a short (not very good) video on the water.

this is my boat built from the aerokits plans. she is the 46 inch version, power is from a brushless motor and lipo set up. sailing trials over easter hols weather permitting!

HI all, I was given this model in a rather sad state as it had been in a junk box in a farm out-building and had been subjected to the weather from time to time . it had been there for about 20 yrs or more and the balsa hull was 60% rotten . I think it was originally IC powered but had been fitted with a Graupner Jumbo 6v motor and an old style rheostatic sc, ( I did try using the sc but it sucked so much power I gave it a miss - also had no reverse)
Amazingly the motor and sc still worked and with a bit of oil and cleaning the motor is still running well ! I'm using a 1975 Futaba 24v 10A sc and 3cell LiPo which pushes it along nicely. I stripped everything and replaced large bits of the hull, (which was fun as every time you picked it up you would poke another hole in it it was so fragile !) I got it to the stage where it would hang together fairly well and glassed the hull which has made it like the proverbial "brick one". The rest was very careful sanding of the deck and cabin, (they were ply so fared a bit better) and a lot of little filling bits to get it right.
Nav lights and cabin lights all work from the micro switch board, the curtains are left over Graupner Commodore (1975), I've added a mast, new windows,flag pole, cleats, ladder and handrails. Any ideas as to its manufacturer would be great. I have seen another one on our local "Trade Me" web site recently.

I took advantage of some nice weather to take my Wavemaster out for a spin this afternoon. She's around 58 years old, I bought her from the son of the original builder and have tried to keep it as original as possible so converted from IC to electric, repainted the lower hull, new stainless inner propshaft, made some handrails and fitted the lights. it was very dirty but has cleaned up a treat. I'm running a Darke Horse 700 with a 7.2v 4300Ah battery for these pictures but have the facility to use either one or two sticks, run time today over 30min with some to spare so I'm well pleased! it's a gorgeous classic boat.

This is the latest of my builds a french deep sea trawler LE ZENITH .We renamed this model in memory of our daughter who sadly passed away two years ago breaking many hearts.
The ship was a delight to build but has still some electrics to complete..This is my weak point having blown up two speed controllers previously through my inexperience.I have just my speed control to wire and we are ready for a test run when the weather is a bit kinder

Happy new year to you all.
The weather having turned a balmy but gusty 9 degrees here in the sunny south. I thought I'd try my 34" boat again today.
Now somewhat lightened and with a new speed 600 motor and 9.6v Ni-Cad battery pack. she ran considerably better but is still somewhat bow heavy. As I have only restored her from an ebay purchase I'm not fully aware what might be causing the weight in the bow area but perhaps will try some weight further aft before attempting frontal surgery. Any ideas welcome.
Best Wishes
Chriis

here my matchbox flower class corvette, como motor driving through gear box, hitech esp, 7.2volt 1200mah power pack.
looks good and sails well have weathered her to look authentic not prestine like my crash tender, range safety launch and arun lifeboat

The weather on Sunday was great here in Peterborough and the perfect opportunity for the first trip out since restoration work was finished. The boat with ballast is very heavy so help from a few friends at the boat club was much appreciated! Performance from a pair of original Decaperms isn't earth shattering but good enough to give a nice scale performance, I might decide to upgrade them over the winter but haven't worked out what the best option might be so any suggestions based on your own experience would be appreciated. Thanks for looking, Roger