Original design "Express Cruiser" type boat. Old home-made fiberglass hull built in UK in the 1970s and rescued from previous owner's garage. Model built during April-July 2015. Approx. 1/24 scale. in trying to emulate a Bertram Bahia Mar boat, I ended up with an originally fictitious design. Real life boat could be a 32-footer (9.75m) yacht. 3mm 9v LED navigation lights system. Runs on Mtroniks G2 3A Hyper BEC 6-12V 15A Constant controller, Biao123 A2122 brushless motor, and a NiMH 10.8v battery.

Model kit made on or about 1969 by defunct German firm Robbe based upon Chris Craft Roamer motor yachts of the era. Hull appears to be inspired on 1950s Chris Craft Constellation series. Model tried to emulate a 46 feet version. I got this one half-built and adapted as a gift for my child inspired in the "My Little Pony" characters. Approx. 1/20 scale. Authentic Chris Craft Roamer 46 measured 46 x 15 feet. it runs with a 4-bladed 40mm metal propeller, 320A 7.2V-16V ESC 30A constant, a NiMH 9.6v battery, and a Mabuchi 540 Motor.

With my boats getting routinely stranded in the middle of nowhere, I felt compelled to commission a rescue vessel and "Triton" was born. "Triton" is a Springer-type tug push boat. With a hull and superstructure consisting of an “Indiana” style command cabin, it was built using a pretty basic birch plywood American kit designed for swimming pool water polo. Kit altered to resemble a fictitious Salvamento Marítimo (Spanish Coast Guard) unit following Salvamento Marítimo’s actual boat markings. Equipment and deck layout inspired on actual Springer tug push boats supporting larger vessels and barges found in US and European ports and rivers. Model built during September – October 2015. Approx. 1/18 scale. Real life boat could be a 30-footer (9.14m) vessel. Equipped with 9v LED navigation lights and sound system. Powered by an HPI Racing 1145 Gt 550 Motor, NiMH 7.4v battery, a 3-bladed 44mm propeller, and a 6-12V 320A RC Ship & Boat R/C Hobby Brushed Motor Speed Controller.

Nice sunny Sunday Sail at Boundary Park so took the Crash Tender for a spin
28XX brushless 11.1v 2200 Lipo 35mm three blade brass prop.
Uses 30 amp cars ESC with small fan.
Tx set to 55% on throttle otherwise it takes off. Rudder throw at 50% for same reason. Switchable to 100% for slow speed manouvers.
Great fun.
Dave

Decided to sail the Solent so took some video to share. Uses 2 Bhuler 12v brushed motors with 4 bladed 45mm PropShop props and 12v 12AHr SLA. Twin Electronize ESCs. Radio is Futaba 6Ex but I will probably change to the Taranis so I can get better control using some bespoke Tx settings to co-ordinate the props and rudder.
Lifeboat crewe had been on a night out so not quite vertical. Aplogies for the shaky video, it's difficult to sail and video at the same time.

This is my 6 month in build of a fully working fishing boat .she has a real I have modified and put a 20kg winch servo so u can real in and out and have drill a hole in to the real and put another servo so u can lock the reel out to.made a back plate on the end of a cut off rod and bolted in to the hull. She has full fpv from the wheel house with a 360 spin HD camera and have even put a digital amp meter so u can look at to and see how mUchida power u have left full running lights controls off hand setc to twin brushless motor water cooled and a large 100 amp esc with air fan and own power supply going to take her out tomorrow for her maiden voyage. Witch has bin a real long time coming and a lot of blood sweat and stress to get it all to work but finally I'm there hope u all enjoy and like what I have dun thanks for reading my post Ben

Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"

This is Creepy,a springer tug that is 5 yrs old now.He pushes #1200lb pumpkins for the pumpkin regatta along with saving many of the PMPBA club members boats from certain sinking or floating away.I never go to any of the club floats without him.He runs a Harbor freight 550 motor running a Target Hobby 320amp ESC,on a 5000mah 2s lipo battery.The plans can be downloaded free off the internet and takes about a week to build for the experienced builder,Great for the new boat builders to do because its an easy build tug.Simple door skins,some balsa,1/2a running gear from Dumas,1.5 brass prop,2x2 rudder from aluminum,cheap 2channel radio,ESC from Target Hobby.

I have just completed my Puffer and am quite pleased with the outcome. The components are quite good but do need a bit of fettling but this is what our hobby is about. This is my third Caldercraft build so I am used to their quality and sparse instructions.   As usual for Caldercraft you need to have your thinking cap on as the A0 plan and the 'instruction book' do not match up but of course they do expect you to have a little bit of experience in model building. it has taken me about 6 months to build working on and off over this time. it has a large hull which is easy to house the motor, ESC, RC and batteries, etc. (I installed 2 lead acid 6 volt batteries, one on each side amidships) which gives stability and ballast. Being a large deep hull it needs a lot of ballast, even in its short length.I have only tested her in the big white nautical test facility at home so do not know how it will perform on our lake but hope to try it out on Sunday if the weather is set fair. Tried her out Wednesday and she sailed really well - maybe a little more ballast in the bow but not too concerned.

Hi,
this is my last model, thames siling barge on its maiden voyage,October 2, 2016. Preparation for construction of barges - Fall 2013. I have not chosen according to what plans I will build. I bought plans for TSB Lady Daphne, finally I chose but I have other plans.
On the internet I found an information plan barge "Champion class" from H.I.Chapelle. Even though I had prepared and cut out the ribs on the LD (1:28, Loa 98 cm), I finally began to build a "Champion". Loa 110 cm.
More photos and a description to> http://barge.homeunix.org/index.php/home <
It still remains to be done many details - winches, dinghy, and more. Also, set the the sails just sewn just for a test.Everything I wanted to finish through the winter
Tom

Its maiden voyage took place at the Knap at Barry South Glamorgan. with the VGMBC.
It's a Robbe kit "San Diego" built by a chap on this website "sharpy1071"
Leopard 4074-1400Kv water-cooled motors 100A Mystery ESC's.

After a few teething problems with transmitter setup, everything went fine.

My 1st excursion into model boat building about a year ago....steep learning curve!!!

Currently powered by 2 x 480 brushed on 11.1v, both motors independently controlled by 2 ESC but soon to be refitted with 2x 1000KV brushless.

Planes beautifully and with twin rudders turns on a sixpence!