Just fresh off the shipyard, this is my version of an American made Uniflite (firm died several years ago) "Salty Dog" 28. its name is a Puerto Rican slang for escapade. From the same firm who designed and made the legendary Vietnam War Patrol River Boat (PBR), this boat was part of Uniflite's recreational boats line. For this one, I utilized a fibreglass hull I found on Ebay and did the rest with Ethylene 2mm plastic sheets. it runs a 9.6v NiHm battery, a 30A Mtroniks controller, a 3-bladed 35mm M4 bronze propeller.

e Hector Read was built in Hull in the 60s for the Gt Yarmout port and Haven as their new Harbour tug to be moored at the pilot station in Gorleston. Giving many years service, was finally sold on when most working ships were fitted with bow/stern thrusters. Much missed as part of the river scene. A scratch built model I made 18 years ago from photo’s and drawings from the Port Authority. Anyone know her ultimate fate?

This free sailing pond yacht has remained a treasured model from childhood. it “escaped” one holiday and sailed out across the bay at Tenby. it was retrieved a mile out to sea by persuading local boatman to pick it up. Hull carved and hollowed from wood. Must be well over 100 years old now. Sails well without rudder fitted.

So here’s another partially built Riva Aquarama, my second project and Plan B after Ciao Bambina ran into stringer difficulties. I started this one on 14 April 2016, and had only 16 days, none of which meant full time working on the boat but merely an hour or two available some evenings and at weekends, to finish this before a friendly “Boat Race” at Coate Water in Swindon with a few friends. Not much in the way of rules for the event, just bring along an RC boat. I didn’t get it finished in time, and since the event, which is the last picture in the post, I have only been able to spend a few more hours, mostly spent planking small mahogany strips over the hull and fore deck. I will be moving this Project 2 forward in between phases of work on the Sea Commander (Scrumpy 3), which is a kit build and is going well after around 6 hours work so far.

Scratchbuilt WW2 1/24 Scale Vosper 73' Type 1 MTB. Built in 2016, in company with a friend's 1/24 scale BPB MGB.
The Vosper hull is built from balsawood and fibreglass. The upper deck and superstructure is from balsawood. The weapons and fittings are from brass, aluminium and plastic. The 20mm and gunner can rotate.

http://ellisboat.com/bunker-and-ellis-downeast-boatbuilders/
The Ellis boats must have been the inspiration for this old kit from Midwest. I bought the boat as seen in the first photos which was built by Don Sutton, Metro Modellers Toronto, Ontario, Canada 🇨🇦
He knew I had my eye on making one from scratch and offered me a fair price to buy his boat.
I am now adding the hard cover over the cockpit as seen on many of the Bunker & Ellis boats.
Previously I added deck furniture to the helm and passenger. Also found the near scale figures.
My plan is to add the forward railing around the bow; add deck boards and more furnishings such as two step boarding ladder, navigation equipment, and possible a fresh coat of paint to the hull.

ON THE WAYS: 1:48 SCALE USCG 140' BAY CLASS ICEBREAKING TUG; FIBERGLASS HULL WITH WOODEN CABIN/SUPERSTRUCTURE KIT FROM COAST GUARD MODELS IN CHICAGOLAND. WILL BE REPRESENTING ONE OF THE CUTTERS I SAILED ABOARD IN THE EARLY '80s.
USCGC KATMAI BAY (WTGB-101), H/P SAULT STE. MARIE, MI, USA.

Aeromarine Laminates Predator 21 hull with HK 2630kv brushless outboard and Turnigy 120a w/c esc. Waterproof metal geared Servo and will have 4-6s lipo when completed.

NOW SOLD

Paul Chilcott built this stunning floating replica of the 'Voyager of the Seas' in under 12 months. The hull was carved from a single block of blue foam. The detail on this cruise ship is remarkable and even features a climbing wall, 'flow rider' and outside cinema just as the full size vessel. Commentary provided by Steve Dean.

MS Voyager of the Seas is the lead ship of the Voyager-class of cruise ships operated by Royal Caribbean international.
Length: 311 m
Capacity: 3,138 passengers
Yard number: 1344
Cost: US$650 million
Tonnage: 138,194 GT; 108,654 NT; 11,132 DWT
Crew: 1,181 crew

Been flying planes for many years and never thought to try boats until very recently. Just tried out the Feilun FT-011 and thought it was awesome for a first time single hull boat. Fairly quick, good run time and the fact that it will self right if it flips is a big bonus. Could not flip it myself despite some full speed tight turns but think it probably would if jumped some waves. You would expect for a relatively cheap outfit that the seals might not be perfect but after the first run there was virtually no water inside. 5.5 minute running time as well which seems decent for a 4S2200 pack. Really enjoyed it and looking forward to taking it out on the water again soon. Filmed with the Panasonic AG-UX180 4K Pro camcorder.

This is my latest progress on the Barracuda RC Boats 52' MLB, US COAST GUARD "TRIUMPH"CG- 52301. I was up until 0500 this AM attempting to finish sheathing the hull. The deck housings are just about ready for paint. I really don't enjoy covering natural wood, but it's a must to achieve proper detail, I reckon. I'm awaiting 1/8" scribed sheathing for the deck, the fantail semicircle will be 1/16" sheathing, and the outboard perimeter of the deck will be 3/16" light mahogany strips. She's powered by a 775 Johnson-type 6-12v motor turning a 4mm shaft and a 75mm 5-blade Raboesch wheel. The 5-blade isn't OEM, but I reckoned she needed some extra muscle to get to the party in distress.

This was just finished by my brother after a four year build. He used plans from the original sternwheeler from Whitehorse, Yukon, Canada. We grew up there so there is a connection. She is seven feet long and the hull is built entirely from popsicle sticks. She is bound for the museum in Whitehorse as a static display.