My newest build , Billing Boats Fairmount Alpine
i start building for one years ago , i have mount bowtruster
and start with all lamps and things , i going to mount an radiocontrolled winch on deck and radiocontrolled cranes
more pictures is comming

Greetings from Germany! I've been out of the net for a while and rebuilding this boat with a totally new superstructure, paint job and electronics. I obtained the fiberglass hull measuring 24.5 X 9 inches from a California fellow via E-bay. Formerly a 45-footer Chris Craft at 1:24 scale, this updated vessel was inspired on a 1970s 30-footer Chris Craft Tournament Fisherman and on 1970s 28 and 33-footer Bertram boats. 😁 The Chris Craft in the attached picture from an early days brochure was the very only Chris Craft utilizing a Deep-Vee hull. The story goes that they apparently copied their boat following the lines of a Bertram 28 based on famed boat designer Ray Hunt. Bertram sued in court and Chris Craft ended up building less than 200 boats of this type. After all, the Chris Craft vessel ended up being better than the Bertram in terms of cabin space and overall value. Highly cherished within the American sports fishing community, many of these boats are still up and running.

All ready to start the build as soon as it warms up a bit.
Its freezing in the shed.

Pride of Hythe first sea trials 21/02/2018. Linkspan 1/96 model kit, took 4 months to build. Triple props and bow thruster. She handled well and had a good accurate speed.

This is A Slipway Kit which I have been rebuilding and finished yesterday working lights, radar, sound system, bow thruster, it sails well.

Dumas kit Carol Moran, renamed Michael for my first grandson.My first build, learning how to make those brass railings each post being soldered following a paper pattern. Some customizing at the request of my grandson with added port holes, and deck features. He helped to paint it.

Mobile Marine do a Skimmer hulls that you can use to build your own skimmer. This is the larger version and they also do a smaller version.
I have used a 2208 brushless with a chopped down 10" prop, cheap 10amp ESC and 11.1v 2200Ma Lipo.
Good when the weed gets too bad!

This is my latest build she is all scratch built.
She is based on a Robert Allen tug built in Cyprus.
She has two 800 motors on belt drive with 70 mm props.

So here’s another partially built Riva Aquarama, my second project and Plan B after Ciao Bambina ran into stringer difficulties. I started this one on 14 April 2016, and had only 16 days, none of which meant full time working on the boat but merely an hour or two available some evenings and at weekends, to finish this before a friendly “Boat Race” at Coate Water in Swindon with a few friends. Not much in the way of rules for the event, just bring along an RC boat. I didn’t get it finished in time, and since the event, which is the last picture in the post, I have only been able to spend a few more hours, mostly spent planking small mahogany strips over the hull and fore deck. I will be moving this Project 2 forward in between phases of work on the Sea Commander (Scrumpy 3), which is a kit build and is going well after around 6 hours work so far.

So here’s my partly completed Riva Aquarama, to be named Ciao Bambina, a scratch build from plans, with laser cut marine ply as the base structure. I started her in April 2016 and got to the stage of balsa wood stringers as per the plans and got into a real pickle, breaking pretty much every strip and gave up after six days of struggle. I then focused on Plan B, which was Project 2, a smaller Riva Aquarama, and again a scratch build, for an event planned with friends at the end of April 2016. I’ll come back to Ciao Bambina once I have completed my Sea Commander and the smaller Riva I think. The stringers will be made with laminated 3mm strips Okichi or similar, which is the way the Sea Commander has been done, so I have learned something from the experience. Balsa doesn’t really work on a big stringer! I will update as I progress the project.

Building a German Police launch right now and thought that the radar scanner components were a bit 'heath robinsonish', so decided to see if I could make an alternative unit.

Photo 1 shows the Radar scanner parts obtained from MMB (ebay) for the princely sum of ONE POUND !!!!! plus 28p postage, and construction is of a medium soft resin that isn't prone to breaking or splitting when shaped or drilled, and a short length of 2mm brass rod becomes the drive shaft. This particular unit has a 44mm sweep bar but there are many other sizes available

Photo 2 shows the drive motor which operates on voltages between 1.5 and 6v, ideal for the control driver which is the next item. Available from saih.tan on Ebay for under 7 pounds, and if the motor is mounted on a removable bracket as I have done, this unit can be used in several models without the need for major 'surgery', the motor and radar shaft being connected with a short piece of rubber tubing

Photo 3 shows the receiver driven radar motor speed control which operates from an auxiliary receiver channel and takes the motor voltage from the main receiver supply, thus obviating the need for a separate supply and switch.
This unit is available from www.mr-rcworld.co.uk and costs a staggering 14.50 post free sheesh !

I must add here that I am in NO way connected to any of the suppliers mentioned here, but just though some other modellers may be interested in 'home brew' accessories and suchlike.

The Skiff is taking shape a scratch build from the pictured book of plans. I am using mahogany which I cut using my table saw