wheelhouse plus some deck planking in place deck planking complete plus gunnel cappings complete boat completely scratch built on a fibre glass hull working winch scratch built boat powered by a 545 motot driving a 60 mm 3 blade prop Robert waterson angus

Scale 3/4" to the foot. Acquired the fibre glass hull and the original plans from Alan Hill . Designed by Alan Hill in 1974 to be made in Ferrocement based on traditional Bawley hull design and sail plan. Seven boats were built by Ferro Marine Services Burnham-on-Crouch.

Model Scale 3/8"to the foot - Fell in love with hull design and just had to build it. Plans were from the book Sailing Trawlers by Edgar J. March Lent to me by Becky, Master of the Thames Barge Cabby.

this is my latest project just got running gear in boat is fully wired main deck sealedworking trawl winch made wheelhouse and hatch just sitting in position bulwark frames allin and trimmed one photo shows finished boat ahc waterson b444 skiboo this boat is all scratch built going to be finished rigged as a trawler scalloper on a fibre glass hull by bill wood
Robert waterson angus

Hull hollowed out and some bits from a static display model, based on several photo's of Greek fishing boats, Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. ) She sails fairly well on first trial at Weymouth & Portland MBC, Miles Cross Farm lake .

Spec: M'tronics Vision 400 brushed motor, M'tronics 15a ESC, 12v SLA battery, 3 blade 30mm Prop. with Led Navigation and deck lights.

Chris

Found this Dense block of foam, floating in local Ashton Canal, whilst sailing other boats with my brother, whilst rescue a stuck boat from the reeds, in 1996 was temporarily on the dole at the time, struck by her Landing craft shape on turning it over plus realised I could carve it like wood, later using my bits box, after carving a couple of box shaped groves, for battery, motors and rc equipment, literal rammed a prop shaft, and rudder shaft through hull, and fashioned some balsa sheet into superstructure suitable camouflaged , I had a "US Army Vietnamese River Craft" of sorts and with its 1 1/2 to 2" thick Hull virtually unsinkable, hence its name :-). Here she is in 2000 sailing at Ethrow Park. May in the future alter her superstructure, she makes a handy towing barge for both mine and my brothers Tug Boats, and if rc left connected can even act as rescue boat if they pack up or get weeded up :-) - Have delete this from You Tube and replaced with slightly clearer version, but it seems to be still working here mysteriously, may cease working eventually, new version above :-)

Shop bought model given to me by my family Xmas 2012, from Kitshack at first they inadvertently order their internal kit for use with a Fibre glass hull, but kindly sent me complete kit for a small extra charge, and told me to keep the cut down bulkheads and keel etc, so may utilise them in another model.
Pity they seem to have moved on to pasture new these days. This Launches first sail at Ethrow Park, 2013. Still fitting out, at first stable but disappointedly slow on 3 blade prop, powered by a Johnson 600, but after a loan of a 40mm twin bladed nylon Prop, of she went at ssspppeedd, final session is when we re tried her with original tweaked 3 blader, not quite as fast but an Improvement,even better when we changed it for an opposite handed similarly tweaked prop, as we realised ESC was set up to run better that way

Sirius was the first vessel to cross the Atlantic under steam power for the entire journey in 1847.
The model is scratch built almost entirely from wood with an plank on frame hull. She is powered by two geared electric motors on paddles. She is radio controlled by 40 Mhz Radio.
The plan was very basic as you can see from photo, but there is a model in the Liverpool Maritime museum which I was able to photograph and copy.
When completed she was purchased from me by the Beale Park, Child of Beale Trust in Reading and is still on display at that site.

YET ANOTHER FERRY BOAT.
THE MODEL WAS BUILT BY MYSELF IN 2008 ON A FIBREGLASS HULL FOR WHICH I AM PART OWNER OF THE MOULD. THE REST OF THE MODEL IS BUILT FROM LITEPLY AND PLASTICARD. BEING WIDE BEAM AND SHALLOW DRAUGHT THESE MODELS SAIL WELL AND REQUIRE NO BALLAST APART FROM THE JELLY BATTERY.
IT IS TWIN SCREW AND TWIN RUDDER SO IS VERY MANOUVERABLE.

SS (RMS) Empress Queen was a steel paddle steamer, which was the last of its type ordered by the isle of Man Steam Packet Company She was chartered by the Admiralty in 1915 and used for trooping duties until she ran aground off Bembridge, isle of Wight, England, and was subsequently abandoned.
The model was scratch built on a modified fibreglass hull. The plans were obtained from Glasgow University and the model was nearly 7ft long with an overall beam including paddles of about 14 inches. She was independently powered with two geared motors from Wulitzer juke box components. I hope to do a build blog in the near future.
She was purchased from me by the Beale Park, part of the Child Beale Trust Reading.

144 scale Liberty ship model based on much modified "Battlers Connection" hull.
All bulkheads, power train and from deck up scratch build

Completed (nearly, still a few more crates needed) in July after a 2 year build on a Kingston Moldings hull. Not a scrap of plywood has been used, all made from Oak, Mahogany, Beech and brass. All fittings scratch built, boiler from Maccsteam in Macclesfield, engine TVR 1 A BB from Macclesfield model engineering supplies. Runs on 60/40 butane propane mix. Radio 3 channels used on Futaba 6EX 2.4 ghz set, 1 fo1 for fwd/reverse, I for steering.