HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf

Hi" fellow model boat members " . I thought I would put some photos of my 1970s restored Aerokits sea commander . it running on a speed 600 motor with a 50 amp speed controller on 7.2 power pack at 4600 mh . finished in Antique Ivory white and Mediterranean blue with a varnished walnut finished deck . I like to take all my rebuilds to my local boating lake which is at Sheringham Norfolk and meet up with my old boat friends . Sheringham is very popular with holiday makers and the local people a like .

Several IC old Aerokits Sea Queen's at pla on Fleetwood lake

Here is my take on a torpedo boat, YES I know why has it got a rocket launcher on rear, well I wanted something that was different from the rest with my own signature on it. it is powered by a .60 size electric motor 120amp esc, two 5000 3 series lipos. Only allowed to have it going on 1/4 power cause of speeed limit on lake. The hull was originally a 48" deep vee hull but added perkasa superstructure to it.

I've finally got around to posting the video of my restored 1/16th Adamcraft BPB Seaplane Tender
See details in photo gallery.
A bit tentative as it was it's first time in the water for 51 years !
At the lake in Crealy, Nr Exeter in July this year.

first is as bought,second is as now,and then on lake with my solent,,

For photos of my fire boat on lake lllawarra n.s.w Austrlia about 15mins drive from home.
I am running a ( OS FP40 motor ) the boat is about 18 years old. And still goes like a new one. (member ID 126 Lyie) and I go boating together on Saturday afternoons.
MARK BEAVER.

On a calm day at King Lears Lake, Watermead Country Park, Wanlip, Leics. First shakedown run.

Just a few more pics, this time of the 1/24th Scale Deans Marine kit I used to scale up the superstructure dimensions for the restoration of my fathers 1/16th scale ST below. Again although built some 2 years ago this was it's first outing on a lake, once more at Crealy near Exeter.
Both 441 & 1515 operated out of Lyme Regis in WW2, 441 on record of rescuing the complete crew of a downed Flying Fortress and 1515 picking up 26 paratroops from Lyme Bay on D day.

First outing in 51 years for my 1/16th scale Seaplane tender, built originally by my father in 1953 and believed to be an Adamcraft Kit, found with a damaged hull and virtually no superstructure in the loft of their house after my mother had moved to a residential home several years ago. I had moved to Lyme Regis in Dorset where several of these craft were based and which was my fathers inspiration for building this initially, so I thought it time to try and restore her.
I had some difficulty finding plans of the ST and eventually bought and built the Deans Marine 1/24th version of this craft, which I then scaled up to rebuild the original.
Power is by a 600 motor with 2 channel radio and seems to work
well on a 7.2 v battery pack.
I've now joined Exeter & District MBC as it appears to be one of the nearest to us in Lyme and the pics show the ST on the Dragonfly Lake at Crealy.
I would be interested in any info. anyone might have as to Adamcraft as my searches have turned up very little. I believe they specified a Tacol electric or Mills 1.3 petrol engine at the time, but my memory might well be flawed as I was only around 10years old at the time.

This is my second attempt at scratch building using a a grp hull. My first boat was an MTB/MGB built on a Perkasa hull as a semi-scale model. (see All things Rc - Power setups).
This time I have concentrated on keeping things lighter but it still weighs in at 2.5kg!
I have built without plans, relying on internet photos scaled etc using "Photo deluxe" and "Photo Express".
Virtually everything is built from plasticard apart from a 3mm liteply deck.
The dinghy is epoxy resin and microballoons, ths scramble nets are Lego!
Power is again courtesy of Graupner -2, Speed 600 8.4v using lh. and r.h 35mm props. Esc is one of those 50amp ones from the far east. These are far cheaper than the Viper Marine 40 used in my MGB, but slightly heavier and less sensitive at low speeds. Current drain (in the bath!) is up to 30A but this gives a superb on the water pace of an, estimated,8mph. Battery is a 4,600 mAhr NiMh.
(A true scale speed approaching 150mph plus).
I sail it on Ullswater in the Lake district and the Vosper Perkasa type hull shape is superb in the real waves that we get there, flying over the crests and taking aboard No water!
It really looks the part as my photos would show if I could learn how to load more than one! Can anybody help with this?

Just a short video of dbninja, stormin and myself (Fireboat) at Southport Model Boat Lake this Sunday.