I guess this is a working vessel?? I wanted something for my TID to tow and after a bit of searching I found a plan for an old Ezi Bild Kit on line and got it enlarged and this is the result.

It takes about 15-20kg of ballast but it tows well.

Here are a couple of pictures one on its maiden "tow"

Kit built but I scrapped the plywood for mahogany as I wanted something in the "Riva" Style.
Powered by a 1000kv brushless on 11.1v, its quick across the water and very stable.

I sail with the Potteries MBC in Stoke.

I found this at a car boot sale off a dealer I went the week before to ask how much he was asking he wanted £70 week after when I took the cash he only wanted £35 so I snatched his hand off.

Saw the plans of 'Farmont' and could not resist the challange of this model. First problem was where and how to creat a removable cabin and decided on having the whole top removable other than the forward and aft decks. I also realised that the plans were simplified so a bit of research on Google revealed pictures of the real things for sale and some indepth pics of the boats being constructed. They omitted the bow breaker for ease of modelling but short cuts are not in my vocabulary. it is also difficult to visulise where all the stair cases go, so going online helped clarify this. I opted for a plank on frame construction covering the hull with a single layer of fibreglass and using lite ply and plasticard for the cabins. The deck planking was marked out with pencil before varnishing. I also wanted the boat to be fully lit and both radars to be operational and counter rotating (looks better from a spectators point of view). Completion date sometime in 2015, watch this space!

Just nearly finished my sea queen and had one outing and it did all I wanted. Scale speed and very plesed with it. Standard motor and 12 volt battery. it was last winters project but only just finished. My 1st motor boat as my others are sail.

Scratch built New York Harbour tug. Wanted something different from the norm. Quite powerful, too much really had to power her on 6v even though she was geared down. Up for sale now on ebay. Dont get the time to sail her much because of work.

In 1963/64 my father built a 34" Fireboat for me. Being only about 12 the job was a little above my knowledge or expertise. Another chap in my class at school had the same boat but rigged as a Fireboat. So I wanted something different.My boat was painted Red.White and Black. When I migrated to Australia I sold the boat about 1970.Earlier this year I had an article published in a Melbourne newspaper saying I was looking to repurchase the boat I had sold 40 years ago. Although I was unable to get my boat, someone had a fireboat that had been sitting around for years.After purchasing the boat, I restored it to the same colours etc that I had had 40 years ago. Thereby naming it Phoenix.

This is a 40" long model of a gas powered Berkley Company kit of a US Air Force crash boat from 1955. The plank on frame kit was in production for about 10 years and was meant to be powered by a model airplane gas motor with a single shaft. it depicts an experimental 50 knot rescue boat (painted in a peace time color scheme) during service with the USAF. if successfull it would have been put into production designed to be a replacement rescue craft for all Air Force 65' crash boats. Unfortunately for the crash boat program the Air Force lost interest as helicopters were become a reliable way of rescueing downed pilots along the coast. The prototype and a sister boat were scrapped, as was the entire program.
The model was given to me to be restored(top picture) for the son of a retired USAF veteran that was a crash boat crewman. The model was built in 1957 and had been run a few times on a tether line, R/C was pretty expensive back in the day. I stripped the hull, filled in all the cracks and rebuilt the mast. I added a small boat, davit, liferaft, coxswain station, spray shield and deck hardware among other things. Actually all the owner wanted was a paint job, he was very happy with it's new appearencep! Although I fiberglassed the wooden hull and made it watertight, the owner doesn't plan to run it, just a memorial to his dad's service. I really enjoyed working on this "rare bird".

Here is my take on a torpedo boat, YES I know why has it got a rocket launcher on rear, well I wanted something that was different from the rest with my own signature on it. it is powered by a .60 size electric motor 120amp esc, two 5000 3 series lipos. Only allowed to have it going on 1/4 power cause of speeed limit on lake. The hull was originally a 48" deep vee hull but added perkasa superstructure to it.

As the name suggests, this is a scratch build sort of tug. The hull is based on a (very small) Pinacce photo of a model steam open boat. I did not fancy making a steam unit (time is the problem) and I had had an idea of doing a tug for quite a while. I liked the shape so started in the usual way. I wanted to keep the cost down and so almost everything is scratch made, though a few bits were "borrowed" from where I work - an engineering firm. Most of the work on this model is more of an experiment for my next tug which will also be from scratch but will have everything working. The "Archer". The winches are at the moment none working, the doors do not open, I have no idea if there is any tug that looks anything like this but I am very pleased with the result. I hope you like it.

This is my Sea Hornet which was rescued from Ebay see photo 1. Gray (Froggyt996) recognised it as a Sea Hornet even with the hideous cabin attched which the prvious owner had made. Also see the propshaft angle in photo 1 - would this have ever worked? Gray again restored this for me, I wanted a mahogany boat which looked like an italian speedboat and this is what he did for me see photo 2. Photo 3 sees the Sea Hornet on the sea at Southsea just after the start of the Round Britain Race in 2008. The receiver battery failed and a very nice Lifeboat Man from Southsea happened to be watching me run the boat and rescued it when it stopped running. it was put in dry dock over this winter to be tidied up again after a couple of years constant use and photo 4 sees it with its 2 new screens, re-varnished and 2 new rubbing strake. it is powered by 2 Graupner Speed 600 motors, a Ripmax sea sprint watercooled speed controller and 2 x 3 blade prop shop props on 2 x light weight shafts. it is also filled with bouyancy foam it case the inevitable happens which makes it quite heavy. it is ran on 2 x 8.4 volts nicad sticks and gives me a running time of approx. 20 minutes with quite a good turn of speed.
Marie (alias Mrs Froggyt996)

This is my latest project, bought for spares, but I wanted a challenge, so I'm putting her back to how she should look. She's a old one I do not know the make but she is of a equivalent size to my other Fire Floats...
Any info appreciated..
Have added a photo of rudder set up any comments??