"BOO BOO Kitty" is a scale model of a Crosby designed Cape Cod Cat Boat.[USA] it was built from scratch at a scale of 9.04" = 1"; the model being 26.5" oal.

The dimensions were taken from a book that highly detailed the building of a real Cat Boat.

The hull is plank-on-frame with epoxy and glass cloth as the final surface. A separate and detachable fin keel was used for sailing of the centerboard model.

Radio controls were a Hitec sail winch [HS-785HB] and one servo for the rudder with a 2 channel JR transmitter.

Copying the book plans, scaling them down, and construction took up the winter of 2006/2007. The model is sailing better than anticipated on a local lake in Langhorne, Pennsylvania.

These pictures are of a scale model of Captain Joshua Slocum's "Spray". it was sailed around the world, singlehanded between 1895-1898. Slocum re-built a Delaware oysterman hull in Fairhaven, MA and had been a gift to him.

After reading of his exploits in an original copy of his book, 'Sailing Alone Around The World' 1899 The Century Co., John copied the drawings that were in the book, established a scale for each and then converted those scales to just one - 1"=14.6" and proceeded to make a model of the famous boat. At that time [2003-2004] there was a commercial kit available but after much research John concluded that he had enough information from the book to build his own version. Actually the available kit contained some mis-information about the boat and that settled the matter.

The model was built plank-on-frame and then covered with epoxy/glass since it was intended for RC. He sailed her during the summer of 2004 and was quite pleased with her performance. An opportunity to sell the model came to him and he did so in January 2005.

Hi, this is my Ebay Crash Tender restoration project stripped ready for re-build.

It is an original kit but needs a lot of work as you can see (some times I think it would be asier to start again - but good fun).

I'm not sure how old it is exactly, it cost me £50 from ebay. Hopefully it will be ready for next summer.

It will be electric powered, probably by a graupner speed 600 single screw.

The boat has no name as yet, it is scrach bult from two photos. I found in a loft as usual. it is about 25/30 years old, she is powered by a darke horse 785 turbo with a 2.5 to 1 gearbox and two 9.6 volt 3700maH NiMH bateries and a 50mm 3 bladed prop, sailed at our local lake.

The boat is far from finished and is not to scale as you can see, but for a first time build it looks pritty fair out on the water. Just one last word, many thanks to all the members of the forum for all your help.bit of a muck here lads the photos were in the loft,the hull I bought for £30.and every thing else is scratch built.

This was originally built circa 1960 by my Uncle, with no radio control, you set the rudder, and let it go! it was then powered by an IC engine. All the fittings, engine and electrics where removed in 1965(ish) for conversion to electric, but the project was scrapped and everything was lost.

After a number of years carrying Action-Man around the living room, it was condemned to 30 years in the loft. Restoration started 3 years ago, completed after 1 year and given back to my Father as a Xmas present.

Sadly, he never got to use it much and it's now back in my possession. After 6 months or so (see posts!) sorting a better motor/esc/battery combo, it's ready for another restoration to bring it back to former glory.

Look closely on the 3rd picture, in the background you can see Fort Perch Rock Lighthouse, a listed building which stands at the entrance to the Mersey, and the famous Liverpool Waterfront further down river. New Brighton lake is in a fabulous setting for boat enthusiasts.

46 inch Crash Tender rescued from E-bay. Currently in the process of total restoration and have had to scratch build the entire super structure. Have fitted a Merco 61 engine with tuned pipe (the noise is awesome).

Have gone for it with the radio control- - employing a Robbe F14 plus an extra 8 channel module with decoder. So far extra controls are : each monitor (scratch built using brass pipe & sheet) left & right (using Robbe pulley set to give me 270 degrees travel), two Irvine water pumps, (real car) hooter, winch (using gearbox from Maplins) and movement for jib and search light.

I sail at Brentwood in Essex - where you can still run IC boats.

This is a model of a sidewall hovercraft fire and rescue boat (Hovermarine HM218) built by James Ramsey.

This started its life as a broken hand vacuum cleaner. Opened up there are two squirrel cage fans. He obtained pictures, sale data, amd small GA drawings from a Hovercraft Museum and was able to scratch build.

It has twin motors operated through mixer and two ESCs, steerable fire monitors plus nav lights, deck lights, flasher, fire pump, siren, rear mast lights and serch lights operated from the transmitter via a Digiserv unit.

Dusseldorf that's recently been finished by Dave Gibson. He has still got a few bugs to Iron out on the electrics such as rudder and motor twitches.

He also thinks it seems to be a little under powered and noisy (however his last build was a motor torpedo boat) so it may just be a little getting used to.