This was a Damage R/C Police Boat ( That is mass produce in the USA and can be found on eBay anyday ) That I converted into a fire boat .This is for display only. it is 21 " or 533.4 mm long 6" or 152.4 mm at it's widest point .Everything on it was put on my myself except the hand rails , air horn and anchor . The black on the deck is all real non-skid .This was a fun project to do for I never did work with anything like this or this large before . Most of my customizing and kitbashing is with diecast fire trucks .
success !! I have done it " my photos of my two boats . the one on the water is the 94 fireboat fitted with a 500 torpedo electric motor and a spectrum rx/tx works very well !! . The other is crash tender 93 under going a rebuild after being rescued on ebay . from a new member A prestney.
HI All,
This was recently purchased through Ebay and undergoing restoration.
The previous owner built it with his father late 50's
This has been in storage for quite some time and lost most of the fittings.
The motor is a torpedo 850 and all is yet untried.
Will keep update on progress.
ive just purchased this boat from ebay and plan to get it back into water,it has a really old motor in it and wonder if I can fit a speed controller to it,it has three connections. one for pos and two for neg can anyone help
Boat is a wood kit built in the 1960 by a friend,built and stored in a shed.needs alot of TLC,doing my best to make it fit for the lake ,have rebuilt all of the superstructure.Was powerd by a lead acid battery/500 motor .Now powerd by a GP.7.2vNiCd 2000 Mah.And a cheap 50amp controller bought from Hong Kong on Ebay.Needs a lot more work to be done and been testing it at Newbrighton wirral.Thanks for watching.Gerry
This is my Sea Hornet which was rescued from Ebay see photo 1. Gray (Froggyt996) recognised it as a Sea Hornet even with the hideous cabin attched which the prvious owner had made. Also see the propshaft angle in photo 1 - would this have ever worked? Gray again restored this for me, I wanted a mahogany boat which looked like an italian speedboat and this is what he did for me see photo 2. Photo 3 sees the Sea Hornet on the sea at Southsea just after the start of the Round Britain Race in 2008. The receiver battery failed and a very nice Lifeboat Man from Southsea happened to be watching me run the boat and rescued it when it stopped running. it was put in dry dock over this winter to be tidied up again after a couple of years constant use and photo 4 sees it with its 2 new screens, re-varnished and 2 new rubbing strake. it is powered by 2 Graupner Speed 600 motors, a Ripmax sea sprint watercooled speed controller and 2 x 3 blade prop shop props on 2 x light weight shafts. it is also filled with bouyancy foam it case the inevitable happens which makes it quite heavy. it is ran on 2 x 8.4 volts nicad sticks and gives me a running time of approx. 20 minutes with quite a good turn of speed.
Marie (alias Mrs Froggyt996)
Hi" there, I like your sea hornet " You have done a brilliant restoration job on it 👍 . What was the last owner thinking of when he put that propshaft in and that hatch cover on the top 😯 ?
Anyway I have just bought one like this and looking forward in restoreing mine too !! Hopefully it should look as good as yours !
Albert .
This is my Aerokits Solent Class Lifeboat that was rescued from Ebay as a wreck see photo's 1 & 2. This was then lovingly restored for me by Gray (Froggyt996). First he had to skin one third of the hull as only two thirds had been skinned. He then had to use copious amounts of filler to make the hull its correct shape see photo 3, instead of the stepped hull as per the original Aerokits build. He then had to put the superstructure together as it had fell apart whilst being posted to us as it had been put together with a hot glue gun yuk!!!!!! Next started the painting as shown in photo 4. Please see my next post for the next stages of its rebuild.
Marie (alias Mrs Froggyt996)
I rescued my PT Boat from EBAY in August 2005. it was owned by a young boy in Birmingham whose Dad had built if for him. it is an original Aerokits kit Fast Patrol Boat. When I bought the boat it had a sound hull with a few damaged fittings, which I removed. Since then I have made new guns, extended the front cabin to carry the life raft to make it look like a late World War II Elco PT Boat and added other new fittings.
I have made 6 working exhausts in brass tubing, have fitted a new open prop shaft running an Octura race prop and a Merco 61 glow engine. it still needs torpedos, guard rails around the machine gun turrets and a few other fittings. The number 349 is from an original Pacific Theatre 80' Elco PT Boat whose name in Bee Bee, which I hope to add at a later date.
I have also painted it in an original Pacific Theatre camouflage from a PT Boat book which I bought for reference and to make it look like a standoff scale model. This boat was also photographed by the local Burton Upon Trent newspaper at the Fireboat day in September 2006. I ran this boat at the Burton Model Boat Club's Fireboat day in September 2006 briefly until I broke the exhaust manifold and had to retire it early.
