This was a precedent 49 inch kit that I made during last year. I wasn't at all Impressed with the kit. The precut plywood parts were cut with knife blade tools and the tools were obviously past their sell by date. The shapes were very poor. if I make another kit I will make a point of looking for a laser cut hit.
Having said that I am pleased with the outcome.

the wood mast / boom were replaced with aluminium tube yokes made from aluminium new planked oak deck combing around the deck hatch the sails come off for transporting to the lake

this is my latest project just got running gear in boat is fully wired main deck sealedworking trawl winch made wheelhouse and hatch just sitting in position bulwark frames allin and trimmed one photo shows finished boat ahc waterson b444 skiboo this boat is all scratch built going to be finished rigged as a trawler scalloper on a fibre glass hull by bill wood
Robert waterson angus

Found this Dense block of foam, floating in local Ashton Canal, whilst sailing other boats with my brother, whilst rescue a stuck boat from the reeds, in 1996 was temporarily on the dole at the time, struck by her Landing craft shape on turning it over plus realised I could carve it like wood, later using my bits box, after carving a couple of box shaped groves, for battery, motors and rc equipment, literal rammed a prop shaft, and rudder shaft through hull, and fashioned some balsa sheet into superstructure suitable camouflaged , I had a "US Army Vietnamese River Craft" of sorts and with its 1 1/2 to 2" thick Hull virtually unsinkable, hence its name :-). Here she is in 2000 sailing at Ethrow Park. May in the future alter her superstructure, she makes a handy towing barge for both mine and my brothers Tug Boats, and if rc left connected can even act as rescue boat if they pack up or get weeded up :-) - Have delete this from You Tube and replaced with slightly clearer version, but it seems to be still working here mysteriously, may cease working eventually, new version above :-)

Very heavy wood made model . This is a Quality little boat who's maker has sadly passed and so was rescued , renovated and put back in service .

Sirius was the first vessel to cross the Atlantic under steam power for the entire journey in 1847.
The model is scratch built almost entirely from wood with an plank on frame hull. She is powered by two geared electric motors on paddles. She is radio controlled by 40 Mhz Radio.
The plan was very basic as you can see from photo, but there is a model in the Liverpool Maritime museum which I was able to photograph and copy.
When completed she was purchased from me by the Beale Park, Child of Beale Trust in Reading and is still on display at that site.

Bought these two for £50! The smallest is HMS Manxman, a scratch build, 6v electric motor drive. it,s just shy of 3ft long. The second ship came to me as apparently HMS Tanganyika, however, on looking at photos of the ship bore no resemblance. it is almost definitely a colony class cruiser of ww2. Possibly HMS FIJI, Nigeria,Jamaica,or Trinidad. The two pillars amidships with the orbs are not what these ships had(?). So much work has yet to be done. The second ship is 5ft 6inches long, made entirely of wood, with a Marx Decaperm 6v Motor powered by a large 6v 10ah gel battery which doubles as ballast, along with 5 large lead weights. Transmitter is a Futaba t6exa, the receiver and servos are Futaba also. I would be interested in knowing some tips about building techniques, best materials and paints for waterproofing etc. And maybe some opinions on it,s identity as swear it looks like HMS Fiji. I have browsed some lovely builds on this site so far, and they really are a credit to you all. Thanks. Gordon

This is Victoria, she was built from a Krick kit about 4 years ago, steam powered with a Maccsteam boiler and an SVS 10mm bore x 11mm stroke oscillator. She is currently taking a well earned rest after 3 years hard work, out 3 days a week, weather permitting. Undergoing boiler cleaning, engine overhaul and a bit of patching up of the woodwork.

Completed (nearly, still a few more crates needed) in July after a 2 year build on a Kingston Moldings hull. Not a scrap of plywood has been used, all made from Oak, Mahogany, Beech and brass. All fittings scratch built, boiler from Maccsteam in Macclesfield, engine TVR 1 A BB from Macclesfield model engineering supplies. Runs on 60/40 butane propane mix. Radio 3 channels used on Futaba 6EX 2.4 ghz set, 1 fo1 for fwd/reverse, I for steering.

HI guys I've been luckily enough to of had the chance to buy this boat at the Heywood bring and buy.
It's in 1/16 scale and is four foot long. it's a complete scratch built hull using plastic sign bord.
The hull was built by Nick Rigby from our club in Bury.
All the rest of the detail has been done by his friend.
At the Monment she has the props installed but no motors.
I will be fitting her out with a couple of 900kv brushless motors and a couple of 90amp esc's all water cooled.plus two 11.1volt 5000ma lipo's in parallel to give a long run time. Hope you like the pictures!

Still under construction but completed to deck level.
Built on an Alan Horne hull, the deckhouses are all scratch built from mahogany and brass from photographs.
The deck is planked with 100metres of 2mm x 0.5mm Lime stripwood, each plank edged using a pencil to achieve the effect of corking.

MY RAF RESCUE BUILT FROM KIT SHACK I HAVE FITTED A 26 PETROL ENGINE IT HAS A CLUTCH WORKING RADAR AND NAV LIGHTS SAILED AT FLEETWOOD LANCS