Had a full refurb but still need the window frames making when I can get round to it . Goes really well with a Graupner 700BB Neodym on 14.4 volts. Still trying to find the right prop, but pretty close now to getting it right . Aim to getting it up to 19.2 volt
Should really fly then.

Lesro Sportsman kit, wood sports fishing boat 33'' in length, weight about 8lb. MFA 850 on 12v (10 NiMHcells 3.5ah) MTroniks 40amp esc, X50 prop. Built by Ian Gardner.
March 2010. I am now using 12 cells and a Graupner speed controller. I added watercooling too and the boat goes noticeably faster- but melted a fuse holder on first outing so I need to upgrade some of the wiring. There was also a bit of prop aerating on turns so might reduce the prop size.
The last photo is with increased voltage.

shear water motor cruiser I made from scratch plank on frame looks well in the water with the added motor and prop give it an edge turning and coming back up the lake no ballast inside the boat its all built in the keel navagation lights work and a small table with a map for someone steering thanks russell

This boat was a hull I was given I made a pilot boat and it looks ok. about 42 ins long goes well and has nav lights that work not to heavy it might of made a mtb but there you are I am a shipwright x bibby line on troop ships and did not much to do with navy ships thanks Russell

this nice looking tender is old now but still look s well in the water thinking of letting it go with a few other boats any body can tell me what they go for thanks russell its has a three chanel radio and water pump and nav light all working .

This was a Damage R/C Police Boat ( That is mass produce in the USA and can be found on eBay anyday ) That I converted into a fire boat .This is for display only. it is 21 " or 533.4 mm long 6" or 152.4 mm at it's widest point .Everything on it was put on my myself except the hand rails , air horn and anchor . The black on the deck is all real non-skid .This was a fun project to do for I never did work with anything like this or this large before . Most of my customizing and kitbashing is with diecast fire trucks .

MY VERSIONS OF AEROKIT BOATS .SEA SCOUT &SEA HORNET. BULT USING DI MENTIONS FROM AN OLD KK CATALOG AND THE MATCHING PICTURES.THE SEA SCOUT
HAS A DC MERLIN FOR POWER .THE HORNET HAS A DC SABRE.BOTH OF THE BOATS HAVE A SINGLE SERVO FOR
RUDDER ONLY CONTROL.THE OTHER BOAT IS MY OWN
DESIGNER PATROL LAUNCH POWERED BY A PAW 1.5 CONVERTED TO WATER COOLING.I TURNED A FLY WHEEL AND MADE A WATER JACKET.
ANY QUESTIONS LET ME KNOW .TONY

two more photos of my fire boat as I said before the crew are not right but ok all scratched built except hull payed A£35 for it the pump is from a astra car A£2 works a treat gordon very good site was told the hull is 30 odd years old

this is my aerokit fire boat 46 inch fitted with a 600 motor 3 bladed prop 55 mm and a 12v 12 amp battery was fitted with a petrol motor when I got her for A£35.. all the top has been rebuilt the 2fire hygents work very good 2 mrtrs of water either side all lights work a good turn of speed but I can get 2 1/2 hrs on the lake the two men are not right but look ok for 10 p each at car boot gordon

THIS IS N=MY ROBBE PT 15 BOAT ITS MY FIRST BOAT BUILD AND I THINK IVE DONE OK SO NOW I AM TRYING MY HAND AT A DUSSEL DORF FIRE BOAT NEXT "HA HA "SO ANY TIPS OR HELP WOULD BE MOST WELCOME

Can anyone tell me what boat this is?
I think its a modified Aerokits fire boat or Sea queen,
The deck is different because it steps down, the cabin looks to be modified, the hull is all fibre glass with wooden bulkheads.
Nice 10cc Merco engine.
Will upload more recent pics as the pics are from about 18 months ago, I've since started re building the boat to sail then in future sell.

success !! I have done it " my photos of my two boats . the one on the water is the 94 fireboat fitted with a 500 torpedo electric motor and a spectrum rx/tx works very well !! . The other is crash tender 93 under going a rebuild after being rescued on ebay . from a new member A prestney.