HI All,here,s a piccy of a recent gathering one sunny sunday afternoon at Gang Werily Fawley Hants.These are all electric powered models all original aerokits with the one closest has all original fittings only missing a few minor items but still goes well for an old girl.we have 93,94 and unumbered yet all 35" models.these are a regular sight at gang werily pond

Hi,all help required ,can anybody tell me what type /make of boat this is ,and can you give me some info as to where I may get plan/bits.I just had it given to me,as well as a Precedent huntsman and require some help refurbishing.
thank you.
gerry

As the name suggests, this is a scratch build sort of tug. The hull is based on a (very small) Pinacce photo of a model steam open boat. I did not fancy making a steam unit (time is the problem) and I had had an idea of doing a tug for quite a while. I liked the shape so started in the usual way. I wanted to keep the cost down and so almost everything is scratch made, though a few bits were "borrowed" from where I work - an engineering firm. Most of the work on this model is more of an experiment for my next tug which will also be from scratch but will have everything working. The "Archer". The winches are at the moment none working, the doors do not open, I have no idea if there is any tug that looks anything like this but I am very pleased with the result. I hope you like it.

A friend, found this boat in a junk shop, Unloved and done up as a cabin cruiser.and asked me if I could rescue if for him. So I did, id just like to thank everyone on the site for posting there pictures and information as it made the job a whole lot easier for me.

Almost finished now, just the windows and transfers to do.

It runs well.

This is my Sea Hornet which was rescued from Ebay see photo 1. Gray (Froggyt996) recognised it as a Sea Hornet even with the hideous cabin attched which the prvious owner had made. Also see the propshaft angle in photo 1 - would this have ever worked? Gray again restored this for me, I wanted a mahogany boat which looked like an italian speedboat and this is what he did for me see photo 2. Photo 3 sees the Sea Hornet on the sea at Southsea just after the start of the Round Britain Race in 2008. The receiver battery failed and a very nice Lifeboat Man from Southsea happened to be watching me run the boat and rescued it when it stopped running. it was put in dry dock over this winter to be tidied up again after a couple of years constant use and photo 4 sees it with its 2 new screens, re-varnished and 2 new rubbing strake. it is powered by 2 Graupner Speed 600 motors, a Ripmax sea sprint watercooled speed controller and 2 x 3 blade prop shop props on 2 x light weight shafts. it is also filled with bouyancy foam it case the inevitable happens which makes it quite heavy. it is ran on 2 x 8.4 volts nicad sticks and gives me a running time of approx. 20 minutes with quite a good turn of speed.
Marie (alias Mrs Froggyt996)

Please see my previous post for the story so far. Photo 1 shows my Lifeboat with its first paintjob and on its first sea trial on King Lear's lake, Watermead Country Park, Leicestershire. Photo 2 shows the boat with its completed paintjob and handrails having been fitted bought from Speedline models which are made of pewter so can be straightened it accidently bent. Photo 3 shows my Lifeboat on its first official outing at the Midlands Model Lifeboat Show at Dudley in May 2008. My crew have now been added also bought from Speedline Models 1/12th scale as they are the best quality resin cast figures I have seen. Strictly speaking they are too moderned dressed but I like the quality so I decided to fit them. The last photo shows it loving the rough seas again at King Lear's Lake at times having 10 to 12 inch waves.
Marie (alias Mrs Froggyt996)

This is my Aerokits Solent Class Lifeboat that was rescued from Ebay as a wreck see photo's 1 & 2. This was then lovingly restored for me by Gray (Froggyt996). First he had to skin one third of the hull as only two thirds had been skinned. He then had to use copious amounts of filler to make the hull its correct shape see photo 3, instead of the stepped hull as per the original Aerokits build. He then had to put the superstructure together as it had fell apart whilst being posted to us as it had been put together with a hot glue gun yuk!!!!!! Next started the painting as shown in photo 4. Please see my next post for the next stages of its rebuild.
Marie (alias Mrs Froggyt996)

RAF Seaplane Tender
RAF Crash Tender
RAF Safety Launch
Police boat project

first tests (after build started 30 yrs ago !) showed great speed and great handling too but short battery life on 12v set up and 700 series motor so now testing with 6v that gives less speed but much longer running.

Sea Hornet with Graupner 540 series motor also undergoing tests and both models have needed 40A ESC to handle current draw.

here is my Fireboat after extensive testing of motors, batteries and props. Full details in "power set up".

Its about to have a gearbox fitted, this should enable me to fit a larger prop, and get longer run times, hopfully!

this model has a 12v marlin motor I am in the process of fitting esc and batterys old kit the gun was from nauticalmarinemodels the figures will be the modifyed
airfix 8th army 1/32 multipose figures painted in a med garb I sail at the southport model boat weather permiting