here's a short clip of my RTTL tearing up the lake :-) she has 2 MTroniks 600s driving 30 ml brass props both rotating in the same direction as in the real boats and she has 2 x 4300 mAmp ni-cad batteries in. Lasts for about 15 mins full chat :-)

John

renovated 49" very easy to plane with current set up 2075 kva brushless 120 a speedo 45 mm brass prop

total scratch built on fibreglass hull 127cm x24 cm,11 months to build 6volt system brushed motor,3blade 35mm brass prop.

Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁

I built this 1/125th scale Amati kit of the Titanic over two years from 2016. it has enhanced etched brass details from Minibrass. Conversion for radio control involved making the hull waterproof with multiple layers of fibreglass cloth bonded with epoxy resin as well as the installation of a drive train and RC gear. With only a tiny rudder, steering is dependent on a mixer unit controlling the differential speed of the propellors.

Trawler enlarged to 1/48 from a free plan called Constant Star in a July 1966 Model boats

385 motor, 35mm 4 bladed brass prop, 6v battery, featuring sound unit and working lights on 3 circuits,

Built from Scrap, about the Same Size as a billings Nordkap, but a lot Cheaper😊

About 10 years old, currently with a DC motor setup Hectoperm but complete base plate can be swapped for a 2 cylinder cheddar models Proteus boiler and steam plant. With ABC boiler control. Lovely detailed model, cruses well on 4 Lead acid batteries in parallel lots of power from the MARXX motor and 60 ~ 70mm I forget, 4 blade brass prop. Actually needs more weight in the back already 4 lumps of lead in the back and some plates of stainless steel. When it gets moving the bow wave is huge. 😁

I built this from a set of plans that i had sized up it measures 43"x12" & runs on a 1400kv Outrunner Motor / 40A esc / 11.1v 5000mah battery 3 bladed Brass 50mm M4 Prop
I was waiting delivery of a new camera so could not record the earlier stages of the build

Nice sunny Sunday Sail at Boundary Park so took the Crash Tender for a spin
28XX brushless 11.1v 2200 Lipo 35mm three blade brass prop.
Uses 30 amp cars ESC with small fan.
Tx set to 55% on throttle otherwise it takes off. Rudder throw at 50% for same reason. Switchable to 100% for slow speed manouvers.
Great fun.
Dave

Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"

This is Creepy,a springer tug that is 5 yrs old now.He pushes #1200lb pumpkins for the pumpkin regatta along with saving many of the PMPBA club members boats from certain sinking or floating away.I never go to any of the club floats without him.He runs a Harbor freight 550 motor running a Target Hobby 320amp ESC,on a 5000mah 2s lipo battery.The plans can be downloaded free off the internet and takes about a week to build for the experienced builder,Great for the new boat builders to do because its an easy build tug.Simple door skins,some balsa,1/2a running gear from Dumas,1.5 brass prop,2x2 rudder from aluminum,cheap 2channel radio,ESC from Target Hobby.

Recently built from an Aeronaut kit, this is a 1/24th scale Pilot Boat based on a German design. Powered by two 540 brushed motors with 3 bladed brass props it attains something like scale speed. The colour is Volkswagen Bright Orange, courtesy of Halfords and the non-slip deck is acrylic green mixed with silver sand then covered with a silk finish varnish.
The boat was filmed at an illuminated regatta staged by Bournville Model Yacht and Power Boat Club on their lake in Bournville, Birmingham
%u2003