Westbourne is a Port of London Authority steam Tug from the Caldercraft Mini-Fleet Range - it is 1:48 scale. This model was discontinued a few years ago but I did manage to purchase a brand new boxed one via ebay a couple of years ago.

During her time Westbourne was hired by the Royal Navy as a rescue tug. She saw service with them between October 1916 and July 1919 in the HM Dockyard. Prior to that she was on general towing service duties on the Thames.
She can be found mentioned in “SHIPS OF THE ROYAL NAVY, 1914-1919 - by TYPE & CLASS
Section 3. SUPPORT and HARBOUR VESSELS”

Following the first world war ‘Westbourne’ was one of three tugs attached to the Port of London Authority (PLA) Dredging Service, they were the "Westbourne", "Thorney" and "Brent", they were all fitted with a drag and under running gear.In 1940 during the Battle of Britain. ‘Westbourne’ and many other tugs were used in assisting the berthing of these large ships that entered the Thames.
The photos show from box to construction plus her on the water.

Building a German Police launch right now and thought that the radar scanner components were a bit 'heath robinsonish', so decided to see if I could make an alternative unit.

Photo 1 shows the Radar scanner parts obtained from MMB (ebay) for the princely sum of ONE POUND !!!!! plus 28p postage, and construction is of a medium soft resin that isn't prone to breaking or splitting when shaped or drilled, and a short length of 2mm brass rod becomes the drive shaft. This particular unit has a 44mm sweep bar but there are many other sizes available

Photo 2 shows the drive motor which operates on voltages between 1.5 and 6v, ideal for the control driver which is the next item. Available from saih.tan on Ebay for under 7 pounds, and if the motor is mounted on a removable bracket as I have done, this unit can be used in several models without the need for major 'surgery', the motor and radar shaft being connected with a short piece of rubber tubing

Photo 3 shows the receiver driven radar motor speed control which operates from an auxiliary receiver channel and takes the motor voltage from the main receiver supply, thus obviating the need for a separate supply and switch.
This unit is available from www.mr-rcworld.co.uk and costs a staggering 14.50 post free sheesh !

I must add here that I am in NO way connected to any of the suppliers mentioned here, but just though some other modellers may be interested in 'home brew' accessories and suchlike.

This fantastic model was scratch built by John of the Solent Radio Controlled Model Boat Club. Here it is seen sailing in light winds on Setley Pond in the New Forest, UK.

She took about a year to construct and is now into the third year of sailing. The boat is based on the period 1929/34 when "Bobby" Somerset owned her, he won the Fastnet race twice and finished second once, infact she is the only boat to win the Fastnet three times. She is based on the river Hamble and is owned by Dauntseys school in Wiltshire and is regularly raced by the pupils there. The model is approximately 1:15 scale.

In 2013 the full size Jolie Brise celebrated the centenary anniversary of her construction by the Paumelle yard in Le Havre in 1913. The world famous, gaff-rigged pilot cutter was the last boat to carry the royal mail under sail and has won the Fastnet Race three times, including the inaugural race in 1925. in 2015 and 2016 she was the overall winner of the Tall Ships Races.

Jolie Brise is owned, maintained and sailed by the pupils of Dauntsey's School. For more information about Jolie Brise go to,
www.joliebrise.com

(apologies...just seen this vid was already posted by Dave M😁)

These pictures are of a scale model of Captain Joshua Slocum's "Spray". it was sailed around the world, singlehanded between 1895-1898. Slocum re-built a Delaware oysterman hull in Fairhaven, MA and had been a gift to him.

After reading of his exploits in an original copy of his book, 'Sailing Alone Around The World' 1899 The Century Co., John copied the drawings that were in the book, established a scale for each and then converted those scales to just one - 1"=14.6" and proceeded to make a model of the famous boat. At that time [2003-2004] there was a commercial kit available but after much research John concluded that he had enough information from the book to build his own version. Actually the available kit contained some mis-information about the boat and that settled the matter.

The model was built plank-on-frame and then covered with epoxy/glass since it was intended for RC. He sailed her during the summer of 2004 and was quite pleased with her performance. An opportunity to sell the model came to him and he did so in January 2005.