here are my three boats, oakgarth 42" twin screw 4 blade props with kort nozzles she also has a working bow thruster.She running two speed controllers off a 12volt sla battery and has full working lights I would love to say I built her but I never, all I have done is added lights and give her a full makeover. Next is Doug the26" pusher tug twin screw 3 blade props full working lights and water jet single speed controller futaba radio set up I have just changed the crane on this again I have only done cosmetics to this tug and my last boat is a 20" seaport tug this is what my grandchildren sail and for 60 quid its great thay love it .the paddling pool was 15 quid for argos and perfect for testing well better than filling the bath .

Here's a few more pics showing my home made winch from a Lego 9volt motor unit which is controlled by a servo and two micro switches. There's a ring on the deck line that all the sail lines are tied onto. Cheers Lubber. PS. The large mainsail is counter ballanced by the deep hull shape right aft. Regards.

Different from my usual models this is a static model in a glass case but a model boat never the less. it was made to commemorate the centenary of the foundering of the isle of Man Steam Packet vessel Ellan Vannin in the Queens Channel on the River Mersey Liverpool UK on 3rd December
1909 with the loss of all lives. The model is constructed almost entirely from scrap cardboard. She is presently on display in the Crosby Coastguard station but this is closing soon so the models fate is in the balance.
She was made to be displayed at the commemoration ceremony on board a Mersey Ferry in December 2009.

I built nordkap in 1995 fitted an action switcher to operate the lights, smoker,radar sails really well

nearly finished will give it a try on the lake when the weather allows

London tug boat. 1:32 12v engine. Radio Futaba 7c. Lights and radar.

hI all this my jet skI fitted with a brushless motor 2700kv with a seaking 125amp e,s,c goes really well running 14.8volt lipo tops 32mph
I have two and they are both great fun

This boat is scratch built on a Fiberglass Hull. The Lily was one of two ferries built in 1900. Her sister ship was the Rose.
The superstructure of the model is largely light-ply and paneled to resemble the orginal. She had an open top deck and as you can see the navigation pods were open to the weather.
A semaphore signal arm was included as radio was not yet used to communicate with each other on the Mersey.
The model is approx1/48 scale and built from a couple of photos and sketches that exist. She is powered by two 340 electric motors and controlled with 2.4ghz radio. A 12 volt battery gives the power. Both decks are individually planked.
She has sailed at Hoylake.

SHE WAS DONATED TO FURNESS MODEL BOAT CLUB AND WAS SCRATCH BUILT SHE HAS JUST MADE HER LAST VOYAGE UNDER THE NAME SAGA LADY CLUB MEMBERS HAVE GIVEN HER A MAKE OVER AND SHE HAS THE OLD ORIGINAL MOTORS POWERING HER ALONG SHE IS A VERY GRACEFUL MODEL AND SAILS VERY WELL

Hi!
This is a scratch build from plans, of the "Angel's Gate II" , at the Los Angeles Maritime museum. This example has a bilge pump, diesel horn, and will be adding a fire monitor. My nephew is pretty excited about it, he is 4, and already has been practicing with the transmitter!

A scratch built model of a Gloucester USA fishing schooner 1900 era. Pine plank on frame, 2 channel radio with a Lego 9volt drive unit as sail winch controlled each way by servo and micro switches, the deck is planked on a thin ply sub-deck and deck openings are sealed with Vaseline. The deep keel slides up into a box through the keel and secured with a bolt.

HI All, Heres some pics of my "American" tug boat based on one of McAllister's tugs. it is scratch built from Images on the net, plank on frames in pine, cut on my bandsaw. it has working lights and radar scanner. it's powered by an electronize 540-12 motor and a 6v 4amp SLA battery.