This hull was bought a flea market, it came with a plan, so it can classed semI scratch built
Photos & videos
Search results
269 posts · Page 13 of 23This hull was bought a flea market, it came with a plan, so it can classed semI scratch built
- mbrownhillRecruitIt looks great - I am just starting to build one. Do you have any recommendations on the fire monitors? I am going to use Robbe and make them rotate.
Do you find the twin motors too much ? - raj002Able SeamanI made my own from bits of tube and old coins for flanges. The nozzle is just sleeved down with progressively smaller tube till it squirted about right. Pump is a standard grapnel unit. Hopefully this link to a photo blog will work. https://picasaweb.google.com/102817163504371499744/RAFCrashTenderModelBoatBuildKitshack46InchVersion
The link will give you details of the motors and speed controllers and the props I used. it's quick!Liked by Inkoust
She was always very slow and hard to manoeuvre. She was made from MM plans. I could never get her to behave in the water. 27Mhz TX/RX. tried changing motor, prop 6 to 12 volts nothing seemed to make much difference, gave up in the end. You can't win them all.
The superstructure of the model is largely light-ply and paneled to resemble the orginal. She had an open top deck and as you can see the navigation pods were open to the weather.
A semaphore signal arm was included as radio was not yet used to communicate with each other on the Mersey.
The model is approx1/48 scale and built from a couple of photos and sketches that exist. She is powered by two 340 electric motors and controlled with 2.4ghz radio. A 12 volt battery gives the power. Both decks are individually planked.
She has sailed at Hoylake.
- lubberlandAble SeamanHI there Cap'n Jim, Glad you like it. The sails are all controlled by the winch line round the after deck. I'll try to post some pics soon, Cheers, Lubber.
- circle43nauticalChief Petty Officer 2nd ClassBRAVO ZULU! The towing and mooring lines are great detail, and the marlinspike is great nautical jewelry.
- jtdavidPetty Officer 1st ClasshI damon.
thanks for your comments , if you need any help with your build, you only have to shout, keep to wood. 👍 and I am a real believer in card board on some of the deck work, allways give it a coat of resin 👍 it has taken me a lifetime to get where I am now and have never lost a boat yet with the materials I use.
david
It is powered by two 6volt 4AH batteries in series to give 12volts.
Model interiors fitted out with tables chairs people etc and 72 leds light to Illuminate the interior saloons.
Just completed and maiden voyage on Hoylake Lake on the Wirral.
2.4Ghz radio and a bilge pump just in case. Sails a treat with 100 passengers. Extensive use of plasticard on superstructure. Fibreglass hull from own mould.
See sailing location at www.hoylakemodelboatclub.co.uk
Our club can supply the hull if you want to have a go at building one.
- Dave MVice AdmiralAs a regular traveller on the Woodchurch I would suggest your model is a very realistic representation. Paint wise the real boat was far from clean or well painted and in places the rust was all to evident.
It was a well loved and trusty vessel and I am sure I am not alone in having many happy memories of cross river trips on her and her sister ferries.
Regards Dave