The weather on Sunday was great here in Peterborough and the perfect opportunity for the first trip out since restoration work was finished. The boat with ballast is very heavy so help from a few friends at the boat club was much appreciated! Performance from a pair of original Decaperms isn't earth shattering but good enough to give a nice scale performance, I might decide to upgrade them over the winter but haven't worked out what the best option might be so any suggestions based on your own experience would be appreciated. Thanks for looking, Roger
Hi,I run my solent at about 3rd power most of the time,normaly just the trim on the hand set is enough ,the mfa 800s with the props I said will give you plenty of power if needed,,at the Cwmbran show I used the solent to tow my Arun around for best part of a hour and still had loads of power let in the battery,and thats running a 12v 12amp lead acid battery,Both motors are run through a single 60amp controller with 15 amp fuses feed each motor...did try plastic props in the 35 and 45 size but found I got reversing problems,,my solent weighs in at 23.3 kg all up and afloat
cheers
Owen
HI again Roger ,good tip for getting boats to the water,I now use my carp fishing trolly,its great for it,can get a 54" Arun and a 48" solent on it with there bits and bobs and just wheel it all to the lake,bought mine off ebay for around ÂA£30 mark
These two boats were refurbished by Kalamunda. The first is a Lesro Sportsman and the second a NorStar Wave Rider. The Sportsman has a Graupner 700 on 8.6v and the WaveRider a brushless motor. The on board camera was arranged by Kalamunda and other video shot by Ianed57. The water is at Crealy, Exeter, the home of Exeter and District Model Boat Club.
It is indeed sad and these videos remind us of happy times spent there. We srtuggle to find a suitable alternative. As the old song says-'You don't know what you've got 'til it's gone!'.
Lesro Sportsman kit, wood sports fishing boat 33'' in length, weight about 8lb. MFA 850 on 12v (10 NiMHcells 3.5ah) MTroniks 40amp esc, X50 prop. Built by Ian Gardner.
March 2010. I am now using 12 cells and a Graupner speed controller. I added watercooling too and the boat goes noticeably faster- but melted a fuse holder on first outing so I need to upgrade some of the wiring. There was also a bit of prop aerating on turns so might reduce the prop size.
The last photo is with increased voltage.
This is the first radio controlled model I have attempted.
It was purchased weekly (80 weeks) when I was living in Spain. Only problem was that all the text and instructions were in spanish and my understanding of spanish was severely limited!!!!!!!.
But with a translation program on my PC I was able to complete the model.
As I said this is my first excursion into wooden modelling, although I am proficient in plastic modelling, especially aircraft.
As a first model I am somewhat proud of the completed model, although it is yet to be christened on the water.
Since completing this I have built a Royal Navy Frigate circa 1799, sadly I was unable to transport it back to the UK. it is awaiting my return to Spain.
this model has a 12v marlin motor I am in the process of fitting esc and batterys old kit the gun was from nauticalmarinemodels the figures will be the modifyed
airfix 8th army 1/32 multipose figures painted in a med garb I sail at the southport model boat weather permiting
This is a video clip of my Fireboat at Southport boating lake in June this year.
The idea of an on board cam was thanks to another member who submitted a video last year of their Sea Queen (see video gallery), I liked the effect so thought I'd give it a go myself. it seems to have worked?
Where do you sail your boat?... Where you can get the best pictures.
1/36 scale LA Fireboat #2 challenges the Portland Fire Bureau's 1927 fire boat, David Campbell, at the Portland Maritime Heritage Festival 2008.
We Lost...New pumps for next year though. - - - 1/36 scale model uses twin graupner voith schneider drives, and twin ESC. Main power is 12volts for the drives, and auxillary pump, and one 6v for the main monitor pump.
Of all the data files on the Crash Boat I have not ever seen any details/ drwgs for the vehicle specifically used to transport the Crash Boat types ( Ie the British Power Boat co ) had transporters for their craft. Anyway I enclose a picture of the OFFICIAL English designed TRANSPORTER vehicle for the Crash Boat and a photo of verification as modelled by Peter Dimberline. I have kept my model stock standard, still have the original plastic red Graupener prop of old I think it is a 30 with a nick or two. Soft copper brake tubing pipe (1/8 I/d) is only around the head and one of the inline exhaust resonators has a water tube outer casing to cool the exhaust piping and inner tube gas temperature which takes out the energy/heat of the exhaust gas and dramatically reduces noise. Hope my hints help .All the best Lyle.
Hull started out as polystyrene foam and plywood. Started July 29,2006 and in the water by Aug. 11th for sea trials. Detailed over the following 18 months.
The model is powered by 12vdc using Graupner Speed400-2.33:1 gear drive, and the small Graupner Schottel drives #1761. Separate ESC and Steering control for each drive.
The Lighting is 3mm LED cast into clear, or tinted, polyurethane lamps.
It sails the Pacific Northwest, USA, homeport Portland, Oregon.
cheers
Owen