having got a seaplane tender it seemed that ishould get a seaplane ,so I did and this is the result...

Of all the data files on the Crash Boat I have not ever seen any details/ drwgs for the vehicle specifically used to transport the Crash Boat types ( Ie the British Power Boat co ) had transporters for their craft. Anyway I enclose a picture of the OFFICIAL English designed TRANSPORTER vehicle for the Crash Boat and a photo of verification as modelled by Peter Dimberline. I have kept my model stock standard, still have the original plastic red Graupener prop of old I think it is a 30 with a nick or two. Soft copper brake tubing pipe (1/8 I/d) is only around the head and one of the inline exhaust resonators has a water tube outer casing to cool the exhaust piping and inner tube gas temperature which takes out the energy/heat of the exhaust gas and dramatically reduces noise. Hope my hints help .All the best Lyle.

More of the Crash boat at our sea water creek and of Peter Dimberline taking a rest after an exhausting day at the radio sticks steering the model. After all, I only did the car loading, driving to the site, carrying fueling and starting, entry to the water and launching and taking the model out of the pond , cleaning and refueling etc to go again. You can see Peter is getting his stamina back. I only ever used 3;1 fuel and in later years 4;1 fuel, just how fast do you want to go? and I have defeated that(annoying) high whine of model engines with my muffler system. Needle valve is left alone and two or three clicks turn out/in in Summer or Winter is of no consequence, maybe too many fiddlers with model engines breaks down reliability? I usually wind the plug out 1 to 2 turns and start her dry and with one or two turns (electric starter belt now) of the flywheel and a fraction choke she STARTS at a bit above idle setting on carby , then throttle to idle disconnect plug lead and then screw in glo plug and lift model casually to pond and slowly place in water at IDLE. Just a bit of a mild throttle check / rudder function check, water outlet check, LOOK AHEAD and if safe clear release and gently open up.

Some 25 to 30 years ago I wrote to Peter Dimberlins for details of the Crash Boat following a mention of him in 'Model Boats '. Peter supplied me with data and we have been so close ever since. These and more Images are of Peter at the helm of my Steam boat' Lady Halina ' and his successfully (ha ha) steering my Crash Boat as I did not know it was so fast/ ballistic. More pictures to follow of this gracious man at the helm at our pond/ tidal creek during his momentus visit to OZ in early 2008. My model is some 30 years young and is with the third engine as the others were worn out with use ( OS35, ENYA35 now a S/C 40 a bit too much) in a 25 pound plus model, yes she is heavy. She has been re done over and over(paint resin paint resin etc) and only had the 1/8 inch steel prop shaft (yes 1/8) replaced recently. I have a "leather flange coupling"as on all my power boats and never let me down and vibration free. Exhaust system 1:muffler to a 2.tar lined tin can to a 3.small resonator (equals quiet ) More to come of my Crash Boat as a result of this gracious man and his service to modelling even to a colonial.

Model Aerokits Fire Tender built up over the last few years. (You may have seen the "Find Bob" competition on this site and incase your wondering, Bob is the character operating the water monitor!

For more useless information you may be interested to know how he got his name? To get straight to the point his head is spring loaded!

This is one of the old aerokits models, it was only partly built when I had it at first (the hull only) but four years on and it works great. The added features are a water pump, which, yes is most definitely more fun! Also a horn from action kit, some say they are not as good as jjc-electronics, but in my experience it is great, I have also added L.E.D. lights shown here and the latest addition is the voice box (as I call it), great fun.

Scratch built SDM MkII tug 1/48 scale.

Hull started out as polystyrene foam and plywood. Started July 29,2006 and in the water by Aug. 11th for sea trials. Detailed over the following 18 months.

The model is powered by 12vdc using Graupner Speed400-2.33:1 gear drive, and the small Graupner Schottel drives #1761. Separate ESC and Steering control for each drive.

The Lighting is 3mm LED cast into clear, or tinted, polyurethane lamps.

It sails the Pacific Northwest, USA, homeport Portland, Oregon.

The black Amsterdam is mine, built in 2004 from the Artesania Latina kit. it is powered by a 545 motor through a pulley reduction drive, and the battery is a 6v, 10ah SLA.

The kit prop was replaced by a brass one. The yellow model belongs to Peter Barlow, a member of our club, and was built several years before mine. it is also an Artesania kit.

Our club, the Ballina RSL Club Marine Modellers, sail in a tidal salt water lake in Ballina, which is on the far north coast of NSW, Australia.
Peter Fitness.

Svitzer tug Ayton Cross, built by Terry O'Rourke in 2006/2007. Mostly scratch built, on a Mobile Marine Models GRP hull.

She is powered by two car heater motors, with a Marx luder bow thruster. I have used an Action kit motor mixer, it works well.

These photos were taken at the Chantry club lake, at the Bluewater shopping centre in kent.

Name of the Boat is the OCEANIC. This boat was in my friends garage for 18 years, when I was given it, it needed some T.L.C. the kit from what I can gather was late 60s.

I had to send a way to Germany to get the plans so I could refurbish it, and some of the bits I had to make myself. it is powered by twin monoperm super 5 motors. it has rotating radar, working mast lights, and bow thrusters. Sailed at Cheddar Steam Modals lake.

The name of the boat is Amsterdam. This was a Artesania Latina kit built by me in the winter of 2005/2006.

Its powered by a car heater blower motor. I hope to sail for the first time, when I come up to Beale Park later this year.

This kit model of the seagoing tug Happy Hunter was started in 1983 by a friend of mine. Finding it too difficult, he let it lie until 2006 when he asked my son and I to build it.

After 219 hours work it is finished and sailing. it is powered by two 545 motors and a single speed controller and has 15 working lights, radar, bow thruster and crane, all of which operate. it is a real beauty, and I see Robbe have just brought out a new H H kit.

This is the Brackengarth, it is semI scratch on mobile marine models grp hull. Built 2005.

It's powered by a car heater motor plus bow thruster. it is sailed with Chantry Club on lake at Bluewater shopping complex in Kent.