This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

HI " I thought I would put my biggest model from my collection for all to look at ! HMS Avenger took approx 3 years to build . " She is a type 21 frigate at 1/64 scale . At 6 feet long . Scratch built on a fibreglass hull from plywood plastic card & metal parts . Works on a six channel futaba skysport .
Full working red & white leds on deck and cabin , lynxs helicopter with working rotor blades with landing lights. Working radars, bofor gun , A ships whooping sound . Runs on two speed 700 motors off a 12volt gel sell battery which give a good 1hr sailling time . Controlled by a 50 amp speed controller with two brass propshafts behind good size rudders which give a excellant turn .
My model HMS Avenger is a copy from the real ship in which took part in the Falklands war in 1982. Painted in the same grey with a green deck . She looks great on display or on the water . Avenger gets a lot of interest from the general public . please enjoy looking at the photos shown at Sheringham & Eaton park Norwich Norfolk .
" thank you .. A Prestney

Thames fireboat gamma,stationed in london cherry tree dock about WW2 used in blitz raids.
Fibreglass hull,wooden deck,twin 550 motors,single working fire monitor,twin working spot lights,and nav lights.
Was a older display model now fully working but steam generator is a bit temperamental.only used at shows has been at Twyford water works open day recently.

Can anyone tell me what boat this is?
I think its a modified Aerokits fire boat or Sea queen,
The deck is different because it steps down, the cabin looks to be modified, the hull is all fibre glass with wooden bulkheads.
Nice 10cc Merco engine.
Will upload more recent pics as the pics are from about 18 months ago, I've since started re building the boat to sail then in future sell.

Thames Fire Service fire boat,this has twin 540 motors,12v pumps(not working yet) and nav lights.Fibreglass hull with wood decks etc.
The model is quite old and has been a static for some time until it fell into my hands,the name Gamma on the bow.
Looks pretty much scratch built and a very good job whoever did it.
Sails occasionally at Gang Werily Fawley Hants.
This is another work in progress,hopefully we will make it to a fun-day maybe next year.

Here is a video of our boat (Vigilant star) sailing at New Brighton boat lake on the wirral every Wednesday.

The boat is a semiscale (Coast Guard Cutter), designed by Hal-Harrison in Marine Modelling. I have doubled its size and put two 540/1 Mfa motors in, driving quanta 45mm props. She is 36" length 8" Bow, runs of one 12 volt 7Ah SLA battery.

It is made from Balsa/Fibreglass resin. Runs well no leaks to date. Gerry.

This is one of the Aerokits models, however it has recently been stripped down to the wood to apply a fibreglass coating.

These video clips show the boat undergoing trials before being completly re-fitted.

This is the Hugh William Viscount Gough. She is a solent class lifeboat. She went into service in 1963 as the Stornoway lifeboat. She was there for around twenty years.

She then went on to Barra and ended her service at Dunbar. She was sold in 1993 and is now out in Malaysia.

I have scratch built her from the hull up. She has a fibre glass hull and the super structure is made from plasticard. She took four weeks to build. I have some bits and bobs to do to her.

She runs on two MFA 850 torprdos, but I am going to down size to 800's.

We sail her at Mote park Maidstone most Sundays and also at shows.

She is 48" long with a scale of 1:12