Rother Class kit built by Barry Sullivan. This has only just been finished and has not been on it's maiden yet.

Also the Trent model, this kit was built about two years ago.

This is my ** version of the Sea Queen. My father owns one of the originals and when one lunch time I saw one on the ** web site I knew I had to get one.
It was to be a winter build project and work started in the autumn of 2006 and it was launched in May 2007. I was very disappointed to see the all white paint finish used on the ** advertisements and decided I was going to re-create the look of the original. Cosmetically the big problem was that the original used mahogany finish ply for the cabin sides and the ** version was just plain birch. However after a bit of staining I was quite happy with the finished colour. This was contrasted against clear coated lime wood deck planking.
Also ***a€™s bag of fittings missed out on the signature life belts so I had to make my own.

One Improvement that I did make was the inclusion of a dashboard, instrument panel and throttle slide.

The graphic on the transom was a custom cut from callie-graphics.

The supplied motor was replaced with an MFA Torpedo 850 which is a direct replacement. ( Same mount, same screw fixing centres etc ).
Battery is a 12V 7A gel cell, ESC is an Mtronics Marine Viper 40A

This was given to me by the Minoros Family from Sutton in Surrey found in a loft after the death of a family member it is 46" long with a beam of 15" and I guess built in the early 1960's.

I think it has been scrach built, but is a copy of the kit above, it has a large petrol engine but I have no idea what cc it is. I would be greatful for any help or suggestions as I require some parts to finish restoring it. and converting it to an electric Motor drive

The Sea Queen is an original Aerokits kit from the early 1960's. it was built by my Dad in the early 1960's. it was originally fitted with an ED Seaotter, next it had a Channel island Special, then a 15cc Gannett and finally fitted with the OS 80 which it still has fitted today.

I sail at King Lear Lake at Watermead County Park in Wanlip Leicestershire. it sat in my attic for 22 years and 2 years ago I dragged it out and gave it a bit of TLC and started to use it again and it has been ran most weekends for the last 2 years.

I ran this boat virtually all day of the Burton Model Boat Club's Fireboat day in September 2006. it is currently in dry dock having a full de-barnacle and repaint.

"BOO BOO Kitty" is a scale model of a Crosby designed Cape Cod Cat Boat.[USA] it was built from scratch at a scale of 9.04" = 1"; the model being 26.5" oal.

The dimensions were taken from a book that highly detailed the building of a real Cat Boat.

The hull is plank-on-frame with epoxy and glass cloth as the final surface. A separate and detachable fin keel was used for sailing of the centerboard model.

Radio controls were a Hitec sail winch [HS-785HB] and one servo for the rudder with a 2 channel JR transmitter.

Copying the book plans, scaling them down, and construction took up the winter of 2006/2007. The model is sailing better than anticipated on a local lake in Langhorne, Pennsylvania.

She's an RAF Seaplane tender, Scratch built from FROG plans and is around 30 years old.

Power is now by Electric motor, but it was originally "Diesel" powered. I sail on Southchurch park pond, Southend on sea Essex.

This is a Model Slipway four hatch coaster. We have named her Lady Debra. She is 6 months old 500 geared torpedo (2.5:1).

We sail her at Mote Park in Maidstone.

John called this model "Nancy Dancer". it started of with plans from 'Nexus Plans Service' for Vic Smeed's 'Vivacity'. John used the hull only plans and created everything else himself. it ended up LOA 49" with a beam of 17". With the 12VDC battery the weight came to 23 1/2#.

Because of his basic 'Sedan Cruiser' he designed all the mechanicals and electricals beneath the main cabin floor, including the battery. There was quite a bit of detail put into the main cabin - unfortunately not shown in the photos - including a galley, eating area, furniture and the helmsman's station. The scale is 1" = 1ft.

This hull is plank on frame using 1/8" pine planks. Below the waterline there's epoxy & glass and above there is just epoxy. All the brightwork, cabin housing & decks is natural Cherry with a clear urethane finish.

The power is a Dumas 12VDC motor with a mechanical speed control. The bottom photo shows that he added a 2:1 gearbox to the motor and ran it in reverse to increase the prop RPMs. He also included a constant running fan to cool the motor due to the confinement of the space.

The single propellor is 2" - 2 pitch - 3 bladed bronze. As on all his models he used a 2 channel JR XR2 75 mhz.

These pictures are of a scale model of Captain Joshua Slocum's "Spray". it was sailed around the world, singlehanded between 1895-1898. Slocum re-built a Delaware oysterman hull in Fairhaven, MA and had been a gift to him.

After reading of his exploits in an original copy of his book, 'Sailing Alone Around The World' 1899 The Century Co., John copied the drawings that were in the book, established a scale for each and then converted those scales to just one - 1"=14.6" and proceeded to make a model of the famous boat. At that time [2003-2004] there was a commercial kit available but after much research John concluded that he had enough information from the book to build his own version. Actually the available kit contained some mis-information about the boat and that settled the matter.

The model was built plank-on-frame and then covered with epoxy/glass since it was intended for RC. He sailed her during the summer of 2004 and was quite pleased with her performance. An opportunity to sell the model came to him and he did so in January 2005.

I believe this is a 34 inch aerokit, I "rescued" it from Ebay, and will bring her back to how she should look...

Watch this space...

After lots of hassle I finally got the motor and prop.shaft aligned.
with a scratch built mastshe's beginning to "LOOK" the part.
More to follow.....

This boat is a model of the Judge McCombs which is the fire boat in Hamilton Ontario Canada. The model was built by Don Hodgson of the Confederation Marine Modellers of Hamilton. Scatch built with about 700 hours, has 3 water pumps run by 12 volt.

The boat started out as the tug Betty-Bess in 1947, in 1950 a small fire pump was installed driven by a separate engine, in 1972 the extra 2 monitors where installed. it will now pump a 1000 gpm. Enclosed find 3 pictures of the model and 1 picture of the real thing.

The boat has no name as yet, it is scrach bult from two photos. I found in a loft as usual. it is about 25/30 years old, she is powered by a darke horse 785 turbo with a 2.5 to 1 gearbox and two 9.6 volt 3700maH NiMH bateries and a 50mm 3 bladed prop, sailed at our local lake.

The boat is far from finished and is not to scale as you can see, but for a first time build it looks pritty fair out on the water. Just one last word, many thanks to all the members of the forum for all your help.bit of a muck here lads the photos were in the loft,the hull I bought for £30.and every thing else is scratch built.