Finally managed to put a little film together of my 1.24 Grey Goose taken at the Herne bay regatta. As well as the usual turning guns, lights and ship sounds this boat fires working torpedo's using a CO2 gas system. Will be putting some film of this on youtube shortly.
If your interested I'll be exhibiting at the Southern Model show this weekend and will demonstrate the torpedo system at the show. Hope to see you there.

This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

Another Mersey ferry and another Royal Iris. This is 1:64 scale (3/16":ft), measures 29" long and weighs 11lbs. Powered by NiMH 6V batteries and Electronize 365-14 motors. it is fitted with either a self-contained sound system playing the 60's "Liverpool sound " music, or fitted with 12V NiMH batteries to illuminate the lights.

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

This 1/12 scale model is based on the Aerokits Solent Class lifeboat. Over the past 5 months it has been under going a major refit. I originally built the boat about 35 years ago and got the "bug" again last September. I've done the best I can to make a silk purse out of a sows ear.

Its powered by two MFA Torpedo 800 electric motors. power comes from two lead acid batteries, each rated at 12v 7Ah. Control is provided by two Mtroniks Tio ESC. The twin spade rudders are linked to one servo. Each ESC has its own receiver. I found that one receiver, using a Y lead, could not continuesly keep the two ESC supplied with a signal and they kept going into Failsafe mode alternately. I got round it by binding two receivers to the one transmitter. Within the engine compartment is an automatic bilge pump. Two probes detect if/when the water level rises to a certain amount in the bilge and activates the pump.

The model has working radar scanner , navigation lights, search light and blue flashing light.

If you want to see the boat in action please go to my You Tube page at https://www.youtube.com/user/coljacktonvale

here are some photos of finished project on the water at pickie pool bangor she is powered by 540 motor and 60mm prop winch radar lights al in working order she tows the net well stacks of power
this boat is scratch built inc winch rgds Robert waterson angus

I bought the hull from a friend who moulds them then built it from pictures I had taken of the actual boat in Blyth harbour it runs on a Graupner 700bb motor 12v battery Robbe Fixed Kort Nozzle with Rudder & 60 mm Propeller lights on a separate 6v battery & figures from Adrian Clutterbuck
the ships cat was a stray

Custom made rotating radar & gun director, flashing LED spot/signal lights, smoke system, RAM sound system "WHOOPER", RAM Bilge pump. Two guns are set to follow the gun director.

Bought of ebay part built .re worked all the stern and smoke stack areas. rc to go in soon ..moving turrets working lights etc..
If I was to do the model again I think I would plank the deck as Im not happy with the finish I have .....who knows if I get fedup I may have a go at re doing it later this yr

Just finished this over Christmas. All lights work ,the deck is done with timber strips. just to rig up rc.
All the rigging detaches from the masts so I can gain access to the battery n the running gear. Lashings of Lead used as ballast. Talk about top heavy.......
Think I will weather her and get her smoking .....later

Hull hollowed out and some bits from a static display model, based on several photo's of Greek fishing boats, Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. ) She sails fairly well on first trial at Weymouth & Portland MBC, Miles Cross Farm lake .

Spec: M'tronics Vision 400 brushed motor, M'tronics 15a ESC, 12v SLA battery, 3 blade 30mm Prop. with Led Navigation and deck lights.

Chris

This is the fifth of the six sisters of the isle of Man Steam Packet Company, entered service in 1952 and scrapped in 1980. it is built on a Metcalf Models hull, and the superstructure is scratch-built from styrene. Fittings are a mix of scratch and purchased. it is powered by 2 Electronize motors with 2 ESC's by EA Electronics, has a smoke unit from Harbor Models controlled by a Viper ESC, a sound system from Model Sounds inc of Ontario, and powered by NiMH batteries. it is also fitted with a working bow rudder and lights, all controlled from a Robbe F14 Navy radio fitted with 2 twin sticks. Preferred sailing location is Lake Lisgar in Tillsonburg, Ontario.