This Boat was bought as the City of ELY Merchant ship, I am in the middle of converting it into the SS John W Brown which was an armed merchant ship built during the second world war. This ship will now sail with the grey funnel section which is part of the Cygnets Model Boat club Maidstone
It has had a complete hull respray, gun platforms built along with new radio control parts and now lights

Scratch built New York Harbour tug. Wanted something different from the norm. Quite powerful, too much really had to power her on 6v even though she was geared down. Up for sale now on ebay. Dont get the time to sail her much because of work.

I have just acquired a part built original kit. I will be restoring this to its full potential in due course but am sharing the pics for now. I will post as a build blog.
Condition is good and the build seems to be to a good standard. I intend to replace the single proptube with a double and use a couple of brushless motors. 👍

Following the legendary Keil Kraft Eezebilt plans for a Royal Air Force Crash Tender boat from the 1950's.. Plans exploded to 130%. Trying to build it completely out of Foam Board.

Completed model should be around 27" in length.

Manta Ray from Ware House Hobbies USA.Powered by a Zenoah 26cc mod engine,fitted with Hitec radio gear on board battery indicator and a fail safe system.Appro 55/60 mph great fun although thinking of giving it up now.

Some of my fast electric boats. The SkI boat is fitted with a brushless and according to the GPS does 32mph

This is my scratch built inshore fishing boat, I adapted the plans from a model boat mag. The hull and deck are planked using cut up blinds from Ikea (they are made if Lime) it has working lights and radar via a 4 way switching unit on one channel, the working winch and trawl net are worked from another channel. Powered with an 18v drill motor working from 12v lead acid battery

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!

My own design deep "V" hull with upper-works loosely to 1:15 scale replica of the Mitchell 31 boats previously used by various Hampshire constabularies in and around the Solent. The intention is to fit this model with a working, rotating, radar scanner using the servo motor and gearbox from an old video camera lens system; working lights including flashing blue police lights and a sound-alike "wee-wah" siren - just for the hell of it (and because I can)! Technical details: Hull length: 867mm. Construction: GRP layup with 1.5 and 3mm ply and balsa deck, cabin etc. Motor: MFA Torpedo 850. Propeller: X50mm plastic. Battery: 2 x three cell LiPo pack in parallel. Speed controller: Mtroniks Viper 25Amp. Radio: Hobby King 2.4GHz.

Having trouble loading pics. Hopefully this works.

Re previous post. Pics didn't load. I set the motor to the rearmost position. Any thoughts?

HI all. Thought you might like some of the bits I made. it will be cable steering, the rudder extension is a prototype and will be redesigned if it works. Servo mount looks cool.