HI Fellow enthusiasts
The first photo shows the boat as it was bought from an E Bay auction in late February for the price of 14.50, for that price I had to bid on it, even thought I had a new kit of the same model on order from a model shop from the end of December, before VAT went up. The models turned out to be the 4 feet versions some 11 inch wide and now is about 19 inch high. This model turned up several days before the new kit turned up, and was a bit worse for ware than anticipated as the deck had started to part company from the hull. After stripping the deck of all remaining deck furniture the deck was re laminated to the hull, prop shafts and rudder tubes also refitted using plenty of resin and cloth. A rubbing strip was fitted around the deck hull line to tidy up the visible damage. When I was happy with repairs the hull and deck was rubbed down and sprayed. Using the information in the new kit and some photos of actual boats, MJB's (My junk boxes) supplied all the required parts to scratch build 90% of the models fittings as seen, this includes the figures on the deck. These being obtained off an EBay site as 1/24 unpainted train scene figures that required some or may be a lot of adjustments to their appearance. Several items have still to be made and fitted. As I'm working on her sister boat P147, will make extra parts in one go.
The boat has twin electric drives, the motors, MFA 919D series, are fitted with their own 2.5/1 gearboxes and they drive 40 mm three bladed conta rotating brass props. They have independent 15 amp Electonize speed controllers run from two 7.2 volt packs in series. The switching arrangements for lighting has still to be finished off. Don't know if I'll fit a sound system as the boat is for my grandson.
The boat has had several trips on the Society's water at Cwmbran with myself and my grandson at the helm. it seems to go fast enough for him. (The new boat P147 has been built with triple screws.) Can't wait to see both models on the water together.
Hope you have enjoyed the pictures and information.
Regards
GreyWolf

HI Fellow Enthusiasts
These pictures show my scratch built RAF Air Sea Rescue launch 2507. it was built using my own scaled up planes over the period July 2006 to August 2008. its approx. 4 feet long by 11 inch wide and stands 24 inch high.
The boat has twin Johnson brushed electric drives via 2.5/1 reduction gearboxes with three bladed 40 mm brass props. The speed controllers being 15 amp Electronize supplied from 4.5 amp D cells made into a 12 volt battery pack.
The boat sound system consists of a Diesel sound generator and machine guns being fired by an electronic ring counter circuit that allows the guns to fire individually or together depending on their selection via a diode network. The unit is switched on and off via a Electonize switch unit that also switches the boats lighting system on and off.
All the special fixtures required for this model being self made this includes the figures found on and in the boat. The basic figures are usually obtained from car boot sales or the local ÂA£ shop for next to nothing and then modified to the model boats requirements.
Launch 2507 was commanded by F/O W. Garret who reputedly made the most northerly pick up on the 26th June 1944 for the crew of a downed Catalina, for this action he was awarded a M.B.E. The Catalina pilot F/Lt. Horner R.C.A.F. died of exposure and was awarded a posthumous V.C.
I hope you enjoyed the pics and information.
Regards
GreyWolf

HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf

bought this 50inch hull off ebay and thought I would try a make a boat just with my own idears and this is how it turned out,powered by a 720bb motor,12inch propshaft and a 60mm 3 blade brass propellor.all built from odd bits of wood in my shed. installed wood in bottom and then filled with a two part epoxy resin

First trials of freshly restored 1970s Aerokits Swordsman rescued as a wreck from ebay (I was the only bidder it looked so bad....!) earlier this year. Was diesel powered and had loads of lead ballest glassed into hull which had to be cut out and replaced with new ply with the rest of the structure lightened and stiffended with new ply. Now fitted with Turnigy 600 Typhoon Brushless and 90A Seawing ESC and 55 min Graupner prop. Handling is excellent and turns really well using a small size Graupner rudder with fast acting large angle Hobbywing servo. Joined my collection of 34 and 46 Fireboats, Sea Hornet, Sea Queen and Commander, all restored over the past 3 years. Aerokits have come into their own with clean and quiet brushless power we could not dream of in the 1960s

Aerokit Fireboat 34"
Boat was given to me in poor condition approx 30 years ago, no running gear and most fittings missing or broken, originally powered with IC motor.
I have installed a 43A 700KV Outrunner Brushless motor, Model No : XYH42-50 and a Hobbywing Seaking 60W / Reverse Program Brushless ESC bought from Giantcod, powered by a 3 cell 2200 mAh Lipo battery runtime 15 to 18min, the prop is a 42.5mm 2 blade racing prop. I am well pleased with the performance of the boat.
I belong and sail at the Hartsholme Electric Model Boat Club, Lincoln.

first time on the water for my latest build, 23" model of british power boat co. 68ft type 3 hants and dorset raf high speed launch,
power is speed 400 driving 35mm three bladed prop, 7.2volt 3300mha nimh planet 2.4 ghz radio,
scratch built, I used scaled down drawings from my aerokits plans then gave the frames more shape to replicate the curves of this boat, the forward section where diaganally planked.
then sides and bottm as normal with sheet ply, deck is teak planks.
I sail on the rotary pool at penzance.

hI all here couple of pics of my range saftey launch and british power boat co type 3 hants and dorset 68ft high speed launch. the range safety launch is powered with speed 400 35mm 3 blade prop, 7.2volts 3300mah gives me about 10 mins run time, the hants and dorset as yet not fitted power plant, thinking to go brushles but dont no enough about size to go for yet.

I took advantage of some nice weather to take my Wavemaster out for a spin this afternoon. She's around 58 years old, I bought her from the son of the original builder and have tried to keep it as original as possible so converted from IC to electric, repainted the lower hull, new stainless inner propshaft, made some handrails and fitted the lights. it was very dirty but has cleaned up a treat. I'm running a Darke Horse 700 with a 7.2v 4300Ah battery for these pictures but have the facility to use either one or two sticks, run time today over 30min with some to spare so I'm well pleased! it's a gorgeous classic boat.

Now up and running again, with new 25A M'tronics ESC and smaller 35mm S prop she went well yesterday at Crealy.
I managed to get these pics of the monitors in action
( a bit limited as I was alone and operating the TX and camera together! )
Regards
Chris

My Astec 35th Scale Vosper 73' ASRL @ Creally yesterday
It has a JP Power 480 motor driving a 25mm 3 blade prop. Powered by a 6v 4Ah LA battery with a RadioLink 2.4ghz RX. and a 15A Mtronics ESC

Also a bit bow heavy until the power / speed comes on.

Regards
Chris

my now completed 23" range safety launch, speed 400 motor, viper micro 10 esc, first trials not as expected using 8 aa cells wired to give 6 volts, trim ok but not getting up on plane. have ordered 7.2volt split power pack, hope that should do the trick.
have also fitted bigger prop. when do next trial will try get some pihotos on the water.

Chiffs