The Hugh William Viscount Gough built by Debbie and Alan
This is the Hugh William Viscount Gough. She is a solent class lifeboat. She went into service in 1963 as the Stornoway lifeboat. She was there for around twenty years.
She then went on to Barra and ended her service at Dunbar. She was sold in 1993 and is now out in Malaysia.
I have scratch built her from the hull up. She has a fibre glass hull and the super structure is made from plasticard. She took four weeks to build. I have some bits and bobs to do to her.
She runs on two MFA 850 torprdos, but I am going to down size to 800's.
We sail her at Mote park Maidstone most Sundays and also at shows.
I agree with Larryshaw48. Many of the members of this site have a general interest in vintage boats including the fireboats, I'm one of them! Other categories are available to cater for that and it keeps the site busy and of broad interest. it also helps build a data and information archive for others to access - a vintage boat treasure chest! The more the merrier I say 😊
HI Alan and Debbie
Nice to see your Aerokits Solent still going strong 😊 . My original kit sails infrequently but I really enjoy sailing her. I intend to update the control from a Bobs board to twin Mtronic ESc's but will keep the two Bhuler motors and 12v 18Ahr SlA. I also need to update the number I originally allocated as mine still has the original Watertight door. Thanks to the internet, this and other on line modelling sites I can now make the model represent an original lifeboat. I enjoy looking at all 😊 model boat pictures and my Aerokits Crash Tender was restored with help from this site. I have a model tug that has fire monitors fitted and I intend to make them operational. Previous attempts showed up my poor soldering in the connection piping 😟 . I agree with thelegos.
Dave
This lifeboat was a part-kit from Metcalfe Mouldings, being just a bare hull and superstructure. All the detailed work was scratch- built by my son and I did all the drive and electrics.
It is powered by two 540 motors through a single water-cooled speed controller and the props are about 35mm. My son and I sail it at our club water at Knightcote in Warwickshire. it is now about 4 years old and, (touch wood), pretty reliable.
"BOO BOO Kitty" is a scale model of a Crosby designed Cape Cod Cat Boat.[USA] it was built from scratch at a scale of 9.04" = 1"; the model being 26.5" oal.
The dimensions were taken from a book that highly detailed the building of a real Cat Boat.
The hull is plank-on-frame with epoxy and glass cloth as the final surface. A separate and detachable fin keel was used for sailing of the centerboard model.
Radio controls were a Hitec sail winch [HS-785HB] and one servo for the rudder with a 2 channel JR transmitter.
Copying the book plans, scaling them down, and construction took up the winter of 2006/2007. The model is sailing better than anticipated on a local lake in Langhorne, Pennsylvania.
The boat has no name as yet, it is scrach bult from two photos. I found in a loft as usual. it is about 25/30 years old, she is powered by a darke horse 785 turbo with a 2.5 to 1 gearbox and two 9.6 volt 3700maH NiMH bateries and a 50mm 3 bladed prop, sailed at our local lake.
The boat is far from finished and is not to scale as you can see, but for a first time build it looks pritty fair out on the water. Just one last word, many thanks to all the members of the forum for all your help.bit of a muck here lads the photos were in the loft,the hull I bought for £30.and every thing else is scratch built.
Aerokits Boats built by Christian Sheppard-Capurro
This is an Aerokits 34" built over 20 years ago and runs an Enya glow engine with Futaba 2-ch radio (upgraded from 1 ch). All fittings were built from scratch.
The second boat is also from the 34" kit, re-cut into a Hants & Dorset RAF HSL. Also powered by Enya.
The third boat used to be an Aerokits Sea Commander, converted into RAF 63ft Pinnace.Powered by an ancient diesel.
The fourth boat is an Aerokits Swordsman flat out in the Bay Of Gibraltar. Big Enya!
46 Inch Crash Tender rescued from E-bay By Peter Harvey
46 inch Crash Tender rescued from E-bay. Currently in the process of total restoration and have had to scratch build the entire super structure. Have fitted a Merco 61 engine with tuned pipe (the noise is awesome).
Have gone for it with the radio control- - employing a Robbe F14 plus an extra 8 channel module with decoder. So far extra controls are : each monitor (scratch built using brass pipe & sheet) left & right (using Robbe pulley set to give me 270 degrees travel), two Irvine water pumps, (real car) hooter, winch (using gearbox from Maplins) and movement for jib and search light.
I sail at Brentwood in Essex - where you can still run IC boats.
This is a model of a sidewall hovercraft fire and rescue boat (Hovermarine HM218) built by James Ramsey.
This started its life as a broken hand vacuum cleaner. Opened up there are two squirrel cage fans. He obtained pictures, sale data, amd small GA drawings from a Hovercraft Museum and was able to scratch build.
It has twin motors operated through mixer and two ESCs, steerable fire monitors plus nav lights, deck lights, flasher, fire pump, siren, rear mast lights and serch lights operated from the transmitter via a Digiserv unit.
Nice to see your Aerokits Solent still going strong 😊 . My original kit sails infrequently but I really enjoy sailing her. I intend to update the control from a Bobs board to twin Mtronic ESc's but will keep the two Bhuler motors and 12v 18Ahr SlA. I also need to update the number I originally allocated as mine still has the original Watertight door. Thanks to the internet, this and other on line modelling sites I can now make the model represent an original lifeboat. I enjoy looking at all 😊 model boat pictures and my Aerokits Crash Tender was restored with help from this site. I have a model tug that has fire monitors fitted and I intend to make them operational. Previous attempts showed up my poor soldering in the connection piping 😟 . I agree with thelegos.
Dave