Mantua models 'Amalfi' Scale 1:35 Length 400mm. Fishing boat converted to 2 CH RC. Sails well, freeboard a little low but ok. Nets detactable for heavier weather sailing!

Photos show her on home 12' dia. pool but she sails well on boating pond. Runs for 20mins. on 4xAA batteries all in.

Super detailed HFM kit to 1/35th scale of Thames Sailing barge. No power, two channel RC. Often sails at Basingstoke.

This is a aero -naut toben tug it is kit built it has a aero-naut 6v geared motor it runs on a 6v 4amph sealed battery has a old type speed controller sliding arm type the battery last in excess of two hours its great with korts nossole steering the hull and cabin are abs and the most water proof boat I have ever sailed on Southport model boat club one of the fleet have changed the set up have a old mfa electro thottle esc in instead now yet to try the new setup

sunday sailing on Cwmbran Model Society water

HI This is a Celia, I think, it was a caldercraft kit but am not sure. it is running on a 545 motor at either 6volt or 7.2volt with a 35mm 3blade brass prop. its performance is about right for the scale and type of boat. it sails at the Lake used by the Cwmbran Club. I bought it last year at the Shepton Mallet Show.

J. R. MORE - LAST OF THE LARGEST STEAM TUGS BUILT ON THE CLYDE. The best looking tugs ever built!

This model is scratch build at 1:48 scale of the SAR&H Durban tug J. R. More, which was the last large steam tug built on the Clyde in 1962.
It took over 2 years to complete this model, which was my first scratch build from the modified plans of a sister tug called the F.C Sturrock, which was also stationed at Durban as the shift tug for that harbour. Other tugs of the class were also stationed at Port Elizabeth and Cape Town.

The J. R. More was the newer day tug in Durban, most often used to service the Union Castle ships and others in, out of Durban and remembered by so many visitors to South Africa of that time.

This model tug on the water has differential motor control, software linked with the rudder, can go about on the spot and a delight to sail as a model, capable of 6 or more hours on the water. Working Rotating Radar, lights and woop-woop sounder as per the original tug. I would also like to install the Telegraph bells, however these would drive fellow modellers to distraction, as they were a very distinctive sound and very regular, Implanted and well remembered by the crews and those in and around the harbour, even today. The engines on the other hand were almost quiet and by all accounts very reliable.

This model is ballasted mainly by two 7 Ah 12 Volt SLA Batteries for the main drive motors and a 2 Ah 12 Volt SLA (Aft ballast) for the Lights, Radar and Sound unit. All up weight is 14Kgs and capable of above scale speed from the two MFA 6:1 ratio Geared Motors driving two 4 bladed 70mm screws.

This model has onboard charge regulator circuit, built-in minature dual volt meter to allow quick on-board voltage inspection and single plug-in charge and regulator socket for charging all 3 Batteries together.

The actual full size J. R. More tug still survives and can be visited at the Durban Maritime Museum in Durban, South Africa. Local supporters are undergoing essential repairs, restoration and preservation with private and company financial support.

J R More is the only surviving large steam tug left of this class and as Important to the skills of the Scottish shipbuilders of the Clyde.

Still finding my way round the site

Pic of the Sea Queen with Jolie Brise in the background.

Sea Queen will have the wheel chair motor, with Mtronks control.

Joilie Brise is having a new ballast keel cast to lowere C of G and Improve sail power.

This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her

Two Wavemasters, both refurbished ebay rescues, sailing at Crealy, near Exeter (one of the last times as the club can no longer use the water).
The first, rebuilt by Kalamunda, is brushless with NiMh cells and the second, having it's first sail since being rebuilt by Ian Gardner, has a Graupner 700 with 3s Lipo's (in parallel) on a 37.5mm X type prop- Electronize 30amp esc.
I think these are lovely looking old boats designed by Les Rowell of Aerokits fame, and obviously based on traditional cruisers from the Norfolk Broads- see Martham Boats, where you can still hire a wooden craft like these, although you'd definitely have the river inspector after you if you sailed up the Thurne at these speeds!

Owing it's origin to the RNLI lifeboats of the 19th century, the US Coast Guard 36'MLB saw service from 1900 to 1987. The USCG built over 300 boats of this class in various "mods" spanning it's life history. Constructed of wood and fitted with a bronze keel it was powered by a 4 cylinder engine later modified with a diesel motor. Early powered 36' boats carried oars and sails as auxillary power. My 36500 model was based on the famous Chatham Lifeboat Station in Massachusetts, USA. On Febuary 18, 1952 the CG 36500 rescued the 32 survivors of the tanker PENDLETON during a night time nor'easter storm. Without radio or radar the Coast Guardsmen found the stricken T-2 tanker in the blizzard, taking the crew off one at a time. With each pass of the lifeboat a tanker crewman climbed down a rope ladder and "fell" into the lifeboat. With all on board, the 36500 found it's way back to Chatham harbor much to the delight of the towns people and the Coast Guard! The most amazing fact regarding this rescue was that the 36 footers were only designed to carry 19 people, including the 3 man CG crew, without capsizing.
The model was scratchbuilt of balsa strips and aircraft plywood, using official USCG blueprints. Powered by a 6 volt motor and a 2 channel radio, the Chatham lifeboat is pleasure to run in my local pond.

HI Two Pictures Before and After, As Purchased on Ebay and Now ready to sail.
First sail 16-12-2012 Cwmbran. First fitted a too powerful Outrunner with a small rudder no good would not steer or go straight. so changed outrunner to a lower rated one about 1200 kVA and fitted a larger rudder (medium size as opposed to a small one). The result was very good and she ran all morning on a 2 x 4.8 Volt 3800 MAh Nimh in series 9.6V total, for about 2 hours.

Quite a blustery but rather cold day so not that many sailors. The Three Brothers of Rye was put through its paces and coped well with the blustery conditions.