This is an Arowana 22.2" mono EP hull, allegedly self righting, however, on it's maiden run I turned it too fast and flipped it, sadly the self righting didn't, and a hatch clip failed, the end result was that after about 40 seconds of being upside down, the back end dissapeared, and it ended up 70% submerged with about 6" of bow pointing towards the sky. I have since had a play in the bath, and cannot get it to self right, also it leaks water from the factory fitted divider for the flood chamber, so not the quality that I thought it was, don't quite know how to rectify that one.

Built from scratch from plans supplied by my hobby store. has a fully remote controlled operating "elevating wheelhouse" with scissor type lifting legs. operating nav lights, fog horn and twin radar units. Also has remote operated forward winches for attaching pusher barges to the bow pusher posts. fitted with twin kort nozzles, handles a treat, steers well and could certanly push more than 3 barges!

This boat was built from Vic Smeed's Silver Mist design, from the fifties I think. The boat is 36'' long by 9''. it is planked in obeche on 6mm birch ply frames with solid blocks for the bow and lower stern sections, epoxied on the inside. it is powered by an MFA geared 500 motor- 2.5:1 I think with a 7.2v NIMH battery. There were one or two details to complete when these photos were taken at Crealy in Exeter- there still are to be honest! I thought I'd add this in as I'm so Impressed with the look of this new site.

HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf

I have admired this design for many years, along with a lot of Vic Smeed's drawings.
This model is enlarged by 1.7 giving a length of 36'' and a scale of 1:16. The finished boat weighs about 15 1/2lbs and is powered by an MFA 919D 540 with 2.5:1 reduction, using an Mtroniks ESC and Planet 2.4ghz radio.
The hull was planked in obeche on 6mm ply keel and frames with mahogany blocks at bow and stern. The photos were taken on her maiden voyage at Crealy in Exeter.

Ahoy
Here is another of my RC collections this the Revell of Germany Corvette SNOWBERRY. My spouse got this kit 7 years ago for my 64th birthday. I never got one of these before I know that Matchbox made this kit and went out of buisness. in overal view this is the Matchbox kit. I was overjoyed when my wife present this kit to me.After opening the kit examining the contents in the kit the hull comes in four peices two bow sections port and starboard. Two stern sections Port and Starboard.. To my horror they gave me two port bow sections. all there to do is to email the company and filed a complaint about the problem but it got worse. with the instruction sheet in my hand I gave them the part No. I need the Starboard bow section 2 weeks later they sent me another port bow section now I have 2 of them. This time I gave them a piece of my mind, I finally called up the company and filed my complaints. they were very humbled over this and they opoligized greratly. 3 weeks later a UPS truck pulled in. the driver approached my door with a huge box and a package I wondered with excitement whats this of. They sent me a new kit and the starboard bow section. What a del of the century, you dont see that no more.

As to the kit a modlers delight this kit is loaded anyone who has built this kit will share the same experince to the attention of detail. the hull length is 36 inch,s scale is 1/72 there aree plenty of room for your RC gear it to can make a good static model as well. Mine is powered by a dumas 6.0 volt electric motor with speed controll. 2 channel system. to make a stronger model for RC opperation use epoxie. The hull comes in 4 sections leaveing no seams to fill. on back of the instruction sheet they give you a selection of color schemes and ships names. I like the north Atlantic color schedule. So I modeled mine as the Snoewberry. These kits still can be purchased I see thgem all the time on ebay.

Boats

Bought this kit from Cornwall models ,great fun to build and fairly easy ..At the moment I am in the process of motorising all the move-able parts,Crane rotate and lift lower,Thruster and lighting..My mate from work is a spark and shows me how "to do it " electrically or Im lost.The relay is home made and powers the Bow Thrusters if anyone wants to make one of their own I have a few better pictures to show the wiring in detail . Most will know of this site but if not you can get some excellent items for your ship builds with a good quick service my home made relays switches etc come from here
http://www.technobotsonline.com/

My Astec 35th Scale Vosper 73' ASRL @ Creally yesterday
It has a JP Power 480 motor driving a 25mm 3 blade prop. Powered by a 6v 4Ah LA battery with a RadioLink 2.4ghz RX. and a 15A Mtronics ESC

Also a bit bow heavy until the power / speed comes on.

Regards
Chris

Happy new year to you all.
The weather having turned a balmy but gusty 9 degrees here in the sunny south. I thought I'd try my 34" boat again today.
Now somewhat lightened and with a new speed 600 motor and 9.6v Ni-Cad battery pack. she ran considerably better but is still somewhat bow heavy. As I have only restored her from an ebay purchase I'm not fully aware what might be causing the weight in the bow area but perhaps will try some weight further aft before attempting frontal surgery. Any ideas welcome.
Best Wishes
Chriis

First try in the water this morning at Crealy.
Found out that she's a bit bow heavy and that the old VW camper blower motor I was trying isn't really up to the job! so off to trawl through to see what the rest of you have powered the 34" boat with ( ideally to take 12v supply as I've got 2 x 6v jelly cells in situ. Although that might be part of the weight problem!)

Best Wishes
Chris

Ahoy
here is a few pictures underway and display of my 1978 issue Lindberg PT-109. I had this old boat for 32 years for power nothing to get excited about. not to much into speed but she goes fast enought not enough to raise the bow out of the water. I didn,t use the kit motor it was to much of a toy its design was primarley used for pool opperation. there for I replaced it with dumas 6 volt electric motor useing the kits reduction gearbox they give you. at the time of the build I had no forsight discard it, perhaps in the near future Iwill scuttle it and use 2 direct 6 volt motors the gear reduction slows down the speed pretty much if you use scale speed it is good for cruiseing at 6 knotts. the gear reduction has been coated with grifite grease as long as I had this old relic there are no wear on the gear teeth so she is good to go untill I decide to scuttle this old gear box. Here are a few attachments of this ols sailor

Photo's taken on sunday [6/4/10] weather was quite windy so water a bit choppy, but fireboat coped very well as you can see from the superb bow wave it creates! the twin prop and 4 rudder arrangement makes it a very maneouverable boat, even at high speed it handles all tight turns with ease and dont swamp the stern deck either!