This is my 1/24th scale S80 Schnellboot,it has a Metcalfe GRP hull,the superstructure is a mix of 3mm/4mm ply and 2mm plasticard,it has 3 x Graupner 600FG motors that have a 3.1 ratio gearboxes fitted,the props are 55mm witches hat type,and it has 3 x Electronize 30amp speed cont,it has a really good scale speed running on 2 motors but nearly jumps out of the water when all 3 are engaged,It was scratch built from plans,but not by me,I got it in plain grey,I did the paint job and added the crew,I sail her on a pond near to my home in Edzell,

This is a scratch built 1;16 fishing/motor sailor from a free plan by james pottinger, made from old teak furniture with mahogany wheelhouse, technobots sound system, 12 volt power shower motor, the original was built by james adams at gourock in 1946 and is still sailing in the western isles of scotland.

Latest photos prior to exhibiting at Abbergavenny on Sunday and Monday 3rd & 4th June.
Sorry about photo quality but camera is playing up.

This model was originally scratch built in 1964 by my Dad as a 15th birthday present for me,the length over all is 60.5" with a beam of 17.5" and a theoretical draught of 3.5",not sure as to the actual design but it is meant to be 1/12th scale, it was originally powered by a 12 Volt windscreen wiper motor out of an old Mercedes car, and the radio gear was a home made system as well, but both are now well beyond repair and I am fitting an MFA 800 Motor with a Fusion Aquapower ESC rated at 125amp. run by a new 2.4 Ghz radio system.
When I get to sea trials stage I will send Update and possible video footage.This boat along with the rest of my harbour, will be on view at the Abbergavenny Steam Rally this weekend June 3rd and 4th(Sunday Monday) in the model section marquee.

HI just completed/refurbished an old and somewhat poor and sorry MFJ Fairey Fantome, complete stripdown repaint and new shafts/motors etc.
Now for some water trials to see what mods are required.

This is a Deans Marine Kit which I built about 2 years ago. it is now fitted with a 180 watt 1100kv brushless motor running on 7.2 volts and using a Turnegy 18amp car brushless ESP. With a 35mm X type prop it FLIES.

Bought off ebay, where else! Had been started as a cruiser, with one very small electric motor,then put in a loft for goodness knows how many years.Replaced prop shaft with 2, 40mm r/h and l/h props, 2x 540 motors running through 40a esc.Radio is 27mhz. 2ch. would like to swap to 2ghz to get rid of the unsightly aerial! I am awaiting some plasticard windows to Improve the looks and will slowly add fittings as and when.I tend to sail it every now and again on the boating lake in BUXTON, no-one has shouted as yet,though I'm not sure the swans approve.!: The photo on the water was just as the power was running down, none as yet at speed.It is very manoeverable with the twin rudders,almost on the gunwhales at speed.

HI shipmates, here,s a few shpts of the "Port ".
She,s a 1/80 scale scratch built cargo ship of the Port line company from around the 1950,
A ship this size requieres quite a bit of balast, I use water, it takes around 40 lds to get her sitting right, this is pumped in and out with a submersible caravan water pump.
Most of the fittings are resin castings.
there are a few more bits to finnish off but could not resist the chance to try her out on the Chasewater pool.

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

This is GRP hull and a part vac-formed cabin and the rest is scratch build using plastic card! Fittings are from my own range along with the crew. Prop shafts and "A" frames are home made along with the rudders which are to scale form John Lamberts drawings.
Two Groupner eco600 motors are used connected to a 6volt cell lasting around 3 hours running.

my boat is powered by a 26cc zenoah engine,I skinned the outside in real carbon fiber and the interior with carbon/kevlar.I use a spektrum DX3S 2.4ghz tx with a spektrum MR3000 marine rx.the boat is equipped with a killer bee remote kill switch that doesn't need any power source to work so it will still kill the engine instantly in the event of battery failure or broken wire or when I want to from the tx. the carbon fiber was hand laid and wetted out with a special resin,then around six weeks of hand sanding with different grades of wet and dry to get it super smooth,then polish.

whilst being off work with cancer have spent three months building my polar trawler which I had to remake a lot of superstructure with plasticard due to the old ply delaminated. it has twin screws powered by two 400 motors and 40 amp esc and 6v sla. I think she looks quite good